Static Route; Chapter 13 Static Route; Ip Static Route; Figure 147 Example Of Static Routing Topology - ZyXEL Communications NBG410W3G User Manual

C
H A P T E R
This chapter shows you how to configure static routes for your ZyXEL Device.

13.1 IP Static Route

The ZyXEL Device usually uses the default gateway to route outbound traffic from local
computers to the Internet. To have the ZyXEL Device send data to devices not reachable
through the default gateway, use static routes.
For example, the next figure shows a computer (A) connected to the ZyXEL Device's LAN
interface. The ZyXEL Device routes most traffic from A to the Internet through the default
gateway (R1). You create one static route to connect to services offered by your ISP behind
router R2. You create another static route to communicate with a separate network behind a
router (R3) connected to the LAN.

Figure 147 Example of Static Routing Topology

A
R3
NBG410W3G Series User's Guide
LAN
WAN
13

Static Route

R1
R2
243