Snmp; Table 79 Advanced > Remote Mgmt > Ftp - ZyXEL Communications NBG410W3G User Manual

Chapter 15 Remote Management
The following table describes the labels in this screen.
Table 79 ADVANCED > REMOTE MGMT > FTP
LABEL
Server Port
Server Access
Secure Client IP
Address
Apply
Reset

15.14 SNMP

Simple Network Management Protocol is a protocol used for exchanging management
information between network devices. SNMP is a member of the TCP/IP protocol suite. Your
ZyXEL Device supports SNMP agent functionality, which allows a manager station to manage
and monitor the ZyXEL Device through the network. The ZyXEL Device supports SNMP
version one (SNMPv1). The next figure illustrates an SNMP management operation.
SNMP is only available if TCP/IP is configured.
274
DESCRIPTION
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Select the interface(s) through which a computer may access the ZyXEL Device
using this service.
A secure client is a "trusted" computer that is allowed to communicate with the
ZyXEL Device using this service.
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyXEL Device using this service.
Click Apply to save your customized settings.
Click Reset to begin configuring this screen afresh.
NBG410W3G Series User's Guide