Figure 181 Advanced > Custom App; Table 86 Advanced > Custom App - ZyXEL Communications NBG410W3G User Manual

Chapter 17 Custom Application
Figure 181 ADVANCED > Custom APP
The following table describes the labels in this screen.
Table 86 ADVANCED > Custom APP
LABEL
Application
Description
Start Port
End Port
Apply
Reset
292
DESCRIPTION
Select the application for which you want the ZyXEL Device to monitor specific ports.
You can use the same application in more than one entry. To remove an entry, select
Select a Type.
Enter information about the reason for monitoring custom port numbers for this
protocol.
Enter the starting port for the range that the ZyXEL Device is to monitor for this
application. If you are only entering a single port number, enter it here.
Enter the ending port for the range that the ZyXEL Device is to monitor for this
application.
Click Apply to save your changes.
Click Reset to begin configuring this screen afresh.
NBG410W3G Series User's Guide