Login Screen; Figure 162 Example: Lock Denoting A Secure Connection - ZyXEL Communications NBG410W3G User Manual

• The actual IP address of the HTTPS server (the IP address of the ZyXEL Device's port
that you are trying to access) does not match the common name specified in the ZyXEL
Device's HTTPS server certificate that your browser received. Do the following to check
the common name specified in the certificate that your ZyXEL Device sends to HTTPS
clients.
2a Click REMOTE MGMT. Write down the name of the certificate displayed in the
Server Certificate field.
2b Click CERTIFICATES. Find the certificate and check its Subject column. CN
stands for certificate's common name (see
Use this procedure to have the ZyXEL Device use a certificate with a common name that
matches the ZyXEL Device's actual IP address. You cannot use this procedure if you need to
access the WAN port and it uses a dynamically assigned IP address.
2a Create a new certificate for the ZyXEL Device that uses the IP address (of the
ZyXEL Device's port that you are trying to access) as the certificate's common
name. For example, to use HTTPS to access a LAN port with IP address
192.168.1.1, create a certificate that uses 192.168.1.1 as the common name.
2b Go to the remote management WWW screen and select the newly created certificate
in the Server Certificate field. Click Apply.

15.4.4 Login Screen

After you accept the certificate, the ZyXEL Device login screen appears. The lock displayed
in the bottom right of the browser status bar denotes a secure connection.

Figure 162 Example: Lock Denoting a Secure Connection

Click Login and you then see the next screen.
The factory default certificate is a common default certificate for all ZyXEL Device models.
NBG410W3G Series User's Guide
Chapter 15 Remote Management
Figure 164 on page 266 for an example).
265