Figure 16 Isp Parameters: Pptp Encapsulation; Table 11 Isp Parameters: Pptp Encapsulation - ZyXEL Communications NBG410W3G User Manual

Figure 16 ISP Parameters: PPTP Encapsulation

The following table describes the labels in this screen.

Table 11 ISP Parameters: PPTP Encapsulation

LABEL
ISP Parameters for
Internet Access
Encapsulation
User Name
Password
Retype to Confirm
Nailed-Up
Idle Timeout
PPTP
Configuration
My IP Address
My IP Subnet Mask Type the subnet mask assigned to you by your ISP (if given).
Server IP Address
NBG410W3G Series User's Guide
DESCRIPTION
Select PPTP from the drop-down list box. To configure a PPTP client, you must
configure the User Name and Password fields for a PPP connection and the
PPTP parameters for a PPTP connection.
Type the user name given to you by your ISP.
Type the password associated with the User Name above.
Type your password again for confirmation.
Select Nailed-Up if you do not want the connection to time out.
Type the time in seconds that elapses before the router automatically
disconnects from the PPTP server.
Type the (static) IP address assigned to you by your ISP.
Type the IP address of the PPTP server.
Chapter 3 Wizard Setup
63