ZyXEL Communications NBG410W3G User Manual page 194

Chapter 10 Authentication Server
Table 50 SECURITY > AUTH SERVER > RADIUS
LABEL
Key
Accounting Server
Active
Server IP Address
Port Number
Key
Apply
Reset
194
DESCRIPTION
Enter a password (up to 31 alphanumeric characters) as the key to be shared
between the external authentication server and the ZyXEL Device.
The key is not sent over the network. This key must be the same on the
external authentication server and ZyXEL Device.
Select the check box to enable user accounting through an external
authentication server.
Enter the IP address of the external accounting server in dotted decimal
notation.
The default port of the RADIUS server for accounting is 1813.
You need not change this value unless your network administrator instructs
you to do so with additional information.
Enter a password (up to 31 alphanumeric characters) as the key to be shared
between the external accounting server and the ZyXEL Device.
The key is not sent over the network. This key must be the same on the
external accounting server and ZyXEL Device.
Click Apply to save your changes.
Click Reset to begin configuring this screen afresh.
NBG410W3G Series User's Guide