Firewall Edit Custom Service; Figure 109 Firewall Edit Custom Service; Table 47 Security > Firewall > Service - ZyXEL Communications NBG410W3G User Manual

The following table describes the labels in this screen.
Table 47 SECURITY > FIREWALL > Service
LABEL
Custom Service
#
Service Name
Protocol
Attribute
Modify
Add
Predefined
Service
#
Service Name
Protocol
Attribute

9.12.1 Firewall Edit Custom Service

Click SECURITY > FIREWALL > Service > Add to display the following screen. Use this
screen to configure a custom service entry not is not predefined in the ZyXEL Device. See
Appendix D on page 385
port numbers.
See Section 9.1 on page 167

Figure 109 Firewall Edit Custom Service

NBG410W3G Series User's Guide
DESCRIPTION
This table shows all configured custom services.
This is the index number of the custom service.
This is the name of the service.
This is the IP protocol type.
If you selected Custom, this is the IP protocol value you entered.
This is the IP port number or ICMP type and code that defines the service.
Click the edit icon to go to the screen where you can edit the service.
Click the delete icon to remove an existing service. A window displays asking you
to confirm that you want to delete the service. Note that subsequent services
move up by one when you take this action.
Click this button to bring up the screen that you use to configure a new custom
service that is not in the predefined list of services.
This table shows all the services that are already configured for use in firewall
rules. See Appendix D on page 385
This is the index number of the predefined service.
This is the name of the service.
This is the IP protocol type. There may be more than one IP protocol type.
This is the IP port number or ICMP type and code that defines the service.
the user's guide appendices for a list of commonly used services and
for more information about the firewall.
Chapter 9 Firewall
for a list of common services.
185