ZyXEL Communications NBG410W3G User Manual page 51

Table 4 Web Configurator HOME Screen (continued)
LABEL
New PIN Code
Confirm New PIN
Code
Apply
Reset budget
counters, resume
budget control
Resume budget
control
Disable budget
control
Apply
Enter modem
unlock code
Apply
Remaining Time
Budget
Remaining Data
Budget
Reset time and
data budget
counters
NBG410W3G Series User's Guide
DESCRIPTION
Configure a PIN code for the SIM card. You can specify any four to eight digits to
have a new PIN code or enter the previous PIN code.
Enter the PIN code again for confirmation.
Click Apply to save your changes in this section.
This field displays if you have enabled budget control but insert a 3G card with a
different user account from the one for which you configured budget control.
Select this option to have the ZyXEL Device do budget calculation starting from 0
but use the previous settings.
This field displays if you have enabled budget control but insert a 3G card with a
different user account from the one for which you configured budget control.
Select this option to have the ZyXEL Device keep the existing statistics and
continue counting.
This field displays if you have enabled budget control but insert a 3G card with a
different user account from the one for which you configured budget control.
Select this option to disable budget control.
If you want to enable and configure new budget control settings for the new user
account, go to the 3G (WAN 2) screen.
The ZyXEL Device keeps the existing statistics if you do not change the budget
control settings. You could reinsert the original card and enable budget control to
have the ZyXEL Device continue counting the budget control statistics.
Click Apply to save your changes in this section.
This field only displays when you insert a 3G card and the internal modem on the
3G card is blocked.
Enter a key to enable the internal modem on your 3G card. By default, the key is
the last four digits of your phone number used to dial up the 3G connection.
Otherwise, you need to get the key from your service provider.
Click Apply to save your changes in this section.
This field is available only when you enable budget control in the 3G (WAN 2)
screen.
This shows the amount of time (in hours and minutes) the 3G connection can still
be used before the ZyXEL Device takes the actions you specified in the 3G (WAN
2) screen.
This field is available only when you enable budget control in the Network > WAN
> 3G (WAN 2) screen.
This shows how much data (in bytes) can still be transmitted through the 3G
connection before the ZyXEL Device takes the actions you specified in the 3G
(WAN 2) screen.
Note: The budget counters will not be reset when you restore the
factory defaults. The budget counters are saved to the flash
every hour or when the 3G connection is dropped. If you
restart the ZyXEL Device within one hour, any change in the
counters will not be saved.
This button is available only when you enable budget control in the 3G (WAN 2)
screen.
Click this button to reset the time and data budgets. The count starts over with the
3G connection's full configured monthly time and data budgets. This does not
affect the normal monthly budget restart.
Chapter 2 Introducing the Web Configurator
51