Figure 14 Isp Parameters: Ethernet Encapsulation; Table 9 Isp Parameters: Ethernet Encapsulation - ZyXEL Communications NBG410W3G User Manual

Chapter 3 Wizard Setup
The wizard screen varies according to the type of encapsulation that you select in the
Encapsulation field.
3.2.1.1 Ethernet
For ISPs (such as Telstra) that send UDP heartbeat packets to verify that the customer is still
online, please create a WAN-to-WAN/ZyXEL Device firewall rule for those packets. Contact
your ISP to find the correct port number.
Choose Ethernet when the WAN port is used as a regular Ethernet port.

Figure 14 ISP Parameters: Ethernet Encapsulation

The following table describes the labels in this screen.

Table 9 ISP Parameters: Ethernet Encapsulation

LABEL
ISP Parameters
for Internet
Access
Encapsulation
WAN IP Address
Assignment
IP Address
Assignment
My WAN IP
Address
My WAN IP
Subnet Mask
60
DESCRIPTION
You must choose the Ethernet option when the WAN port is used as a regular
Ethernet. Otherwise, choose PPPoE or PPTP for a dial-up connection.
Select Dynamic If your ISP did not assign you a fixed IP address. This is the
default selection.
Select Static If the ISP assigned a fixed IP address.
The fields below are available only when you select Static.
Enter your WAN IP address in this field.
Enter the IP subnet mask in this field.
NBG410W3G Series User's Guide