Secure Telnet Using Ssh Examples; Example 1: Microsoft Windows; Example 2: Linux; Figure 169 Ssh Example 1: Store Host Key - ZyXEL Communications NBG410W3G User Manual

Chapter 15 Remote Management

15.9 Secure Telnet Using SSH Examples

This section shows two examples using a command interface and a graphical interface SSH
client program to remotely access the ZyXEL Device. The configuration and connection steps
are similar for most SSH client programs. Refer to your SSH client program user's guide.

15.9.1 Example 1: Microsoft Windows

This section describes how to access the ZyXEL Device using the Secure Shell Client
program.
1 Launch the SSH client and specify the connection information (IP address, port number
or device name) for the ZyXEL Device.
2 Configure the SSH client to accept connection using SSH version 1.
3 A window displays prompting you to store the host key in you computer. Click Yes to
continue.

Figure 169 SSH Example 1: Store Host Key

Enter the password to log in to the ZyXEL Device. The CLI main menu displays next.

15.9.2 Example 2: Linux

This section describes how to access the ZyXEL Device using the OpenSSH client program
that comes with most Linux distributions.
1 Test whether the SSH service is available on the ZyXEL Device.
Enter "telnet 192.168.1.1 22" at a terminal prompt and press [ENTER]. The
computer attempts to connect to port 22 on the ZyXEL Device (using the default IP
address of 192.168.1.1).
A message displays indicating the SSH protocol version supported by the ZyXEL Device.

Figure 170 SSH Example 2: Test

270
$ telnet 192.168.1.1 22
Trying 192.168.1.1...
Connected to 192.168.1.1.
Escape character is '^]'.
SSH-1.5-1.0.0
NBG410W3G Series User's Guide