Chapter 41 Call Scheduling; Introduction; Figure 254 Menu 26 Schedule Setup - ZyXEL Communications ADSL VoIP IAD with 802.11g Wireless 2602HW Series User Manual

Call scheduling (applicable for PPPoA or PPPoE encapsulation only) allows you to dictate
when a remote node should be called and for how long.

41.1 Introduction

The call scheduling feature allows the Prestige to manage a remote node and dictate when a
remote node should be called and for how long. This feature is similar to the scheduler in a
videocassette recorder (you can specify a time period for the VCR to record). You can apply
up to 4 schedule sets in Menu 11.1 — Remote Node Profile. From the main menu, enter 26
to access Menu 26 — Schedule Setup as shown next.

Figure 254 Menu 26 Schedule Setup

Schedule
Set #
------
1
2
3
4
5
6
Lower numbered sets take precedence over higher numbered sets thereby avoiding scheduling
conflicts. For example, if sets 1, 2 ,3 and 4 in are applied in the remote node then set 1 will
take precedence over set 2, 3 and 4 as the Prestige, by default, applies the lowest numbered set
first. Set 2 will take precedence over set 3 and 4, and so on.
You can design up to 12 schedule sets but you can only apply up to four schedule sets for a
remote node.
To delete a schedule set, enter the set number and press [SPACE BAR] and then [ENTER]
(or delete) in the Edit Name field.

Chapter 41 Call Scheduling

Menu 26 - Schedule Setup
Name
-----------------
_______________
_______________
_______________
_______________
_______________
_______________
Enter Schedule Set Number to Configure= 0
Edit Name= N/A
Press ENTER to Confirm or ESC to Cancel:
Prestige 2602HW Series User's Guide
C
H A P T E R
Call Scheduling
Schedule
Set #
------ -----------------
7 _______________
8 _______________
9 _______________
10 _______________
11 _______________
12 _______________
4 1
Name
399