Table 183 Cdr Logs; Table 184 Ppp Logs - ZyXEL Communications ADSL VoIP IAD with 802.11g Wireless 2602HW Series User Manual

Prestige 2602HW Series User's Guide
Table 182 ICMP Logs (continued)
LOG MESSAGE
Triangle route packet forwarded:
ICMP
Packet without a NAT table entry
blocked: ICMP
Unsupported/out-of-order ICMP:
ICMP
Router reply ICMP packet: ICMP

Table 183 CDR Logs

LOG MESSAGE
board %d line %d channel %d,
call %d, %s C01 Outgoing Call
dev=%x ch=%x %s
board %d line %d channel %d,
call %d, %s C02 OutCall
Connected %d %s
board %d line %d channel %d,
call %d, %s C02 Call
Terminated

Table 184 PPP Logs

LOG MESSAGE
ppp:LCP Starting
ppp:LCP Opening
ppp:CHAP Opening
ppp:IPCP Starting The PPP connection's Internet Protocol Control Protocol stage is starting.
ppp:IPCP Opening
ppp:LCP Closing
ppp:IPCP Closing
498
DESCRIPTION
The firewall allowed a triangle route session to pass
through.
The router blocked a packet that didn't have a
corresponding NAT table entry.
The firewall does not support this kind of ICMP packets or
the ICMP packets are out of order.
The router sent an ICMP reply packet to the sender.
DESCRIPTION
The router received the setup requirements for a call. "call" is
the reference (count) number of the call. "dev" is the device
type (3 is for dial-up, 6 is for PPPoE, 10 is for PPTP).
"channel" or "ch" is the call channel ID.For example,"board 0
line 0 channel 0, call 3, C01 Outgoing Call dev=6 ch=0
"Means the router has dialed to the PPPoE server 3 times.
The PPPoE, PPTP or dial-up call is connected.
The PPPoE, PPTP or dial-up call was disconnected.
DESCRIPTION
The PPP connection's Link Control Protocol stage has started.
The PPP connection's Link Control Protocol stage is opening.
The PPP connection's Challenge Handshake Authentication Protocol stage is
opening.
The PPP connection's Internet Protocol Control Protocol stage is opening.
The PPP connection's Link Control Protocol stage is closing.
The PPP connection's Internet Protocol Control Protocol stage is closing.