Nat Setup; Address Mapping Sets; Figure 164 Menu 15 Nat Setup; Table 105 Applying Nat In Menus 4 & 11.3 - ZyXEL Communications ADSL VoIP IAD with 802.11g Wireless 2602HW Series User Manual

Table 105 Applying NAT in Menus 4 & 11.3
FIELD
NAT

31.3 NAT Setup

Use the address mapping sets menus and submenus to create the mapping table used to assign
global addresses to computers on the LAN. Set 255 is used for SUA. When you select Full
Feature in menu 4 or 11.3, the SMT will use Set 1. When you select SUA Only, the SMT
will use the pre-configured Set 255 (read only).
The server set is a list of LAN servers mapped to external ports. To use this set, a server rule
must be set up inside the NAT address mapping set. Please see the section on port forwarding
in the chapter on NAT web configurator screens for further information on these menus. To
configure NAT, enter 15 from the main menu to bring up the following screen.
Figure 164
31.3.1

Address Mapping Sets

Enter 1 to bring up Menu 15.1 — Address Mapping Sets.
Chapter 31 Network Address Translation (NAT)
DESCRIPTION
Press [SPACE BAR] and then [ENTER] to select Full Feature if you have multiple public
WAN IP addresses for your Prestige. The SMT uses the address mapping set that you
configure and enter in the Address Mapping Set field (see
Select None to disable NAT.
When you select SUA Only, the SMT uses Address Mapping Set 255 (see
page 316). Choose SUA Only if you have just one public WAN IP address for your
Prestige.
Menu 15 NAT Setup
Menu 15 - NAT Setup
1. Address Mapping Sets
2. NAT Server Sets
Enter Menu Selection Number:
Prestige 2602HW Series User's Guide
Figure 165 on page 316).
Figure 166 on
315