Figure 250 Example Of Ip Policy Routing; Figure 251 Ip Routing Policy Example - ZyXEL Communications ADSL VoIP IAD with 802.11g Wireless 2602HW Series User Manual

Figure 250 Example of IP Policy Routing

To force packets coming from clients with IP addresses of 192.168.1.33 to 192.168.1.64 to be
routed to the Internet via the WAN port of the Prestige, follow the steps as shown next.
1 Create a routing policy set in menu 25.
2 Create a rule for this set in Menu 25.1.1 — IP Routing Policy as shown next.

Figure 251 IP Routing Policy Example

Gateway addr
1 Check Menu 25.1 — IP Routing Policy Setup to see if the rule is added correctly.
2 Create another policy set in menu 25.
Chapter 40 IP Policy Routing
Menu 25.1.1 - IP Routing Policy
Policy Set Name= set1
Active= Yes
Criteria:
IP Protocol = 6
Type of Service= Don't Care
Precedence = Don't Care
Source:
addr start= 192.168.1.2
port start= 0
Destination:
addr start= 0.0.0.0
port start= 80
Action= Matched
= 192.168.1.1
Type of Service= No Change
Precedence = No Change
Press ENTER to Confirm or ESC to Cancel:
Prestige 2602HW Series User's Guide
Packet length= 10
Len Comp= N/A
end= 192.168.1.64
end= N/A
end= N/A
end= 80
Log= No
397