ZyXEL Communications ADSL VoIP IAD with 802.11g Wireless 2602HW Series User Manual page 60

Prestige 2602HW Series User's Guide
Table 3 Web Configurator Screens Summary (continued)
LINK
Voice
Dynamic DNS
Time and Date
Firewall
Content Filter
VPN
Remote
Management
UPnP
Logs
Maintenance
System Status
DHCP Table
Any IP Table
60
SUB-LINK FUNCTION
SIP Settings Use this screen to configure your Prestige's Session Initiation
Protocol settings.
QoS Use this screen to configure your Prestige's Quality of Service
settings.
Phone Use this screen to configure your Prestige's phone settings.
Speed Dial Use this screen to configure speed dial for SIP phone numbers
that you call often.
Lifeline Use this screen to configure your Prestige's settings for PSTN
calls (Prestige 2602HW-L only).
Common Use this screen to configure general phone port settings.
Use this screen to set up dynamic DNS.
Use this screen to change your Prestige's time and date.
Default Policy Use this screen to activate/deactivate the firewall and the
direction of network traffic to which to apply the rule.
Rule Summary This screen shows a summary of the firewall rules, and allows
you to edit/add a firewall rule.
Anti Probing Use this screen to change your anti-probing settings.
Threshold Use this screen to configure the threshold for DoS attacks.
Keyword Use this screen to block sites containing certain keywords in the
URL.
Schedule Use this screen to set the days and times for the Prestige to
perform content filtering.
Trusted Use this screen to exclude a range of users on the LAN from
content filtering on your Prestige.
Setup Use this screen to configure VPN connections and view the rule
summary.
Monitor Use this screen to display and manage active VPN connections.
Global Setting Use this screen to allow NetBIOS packets through the VPN
connections.
Use this screen to configure through which interface(s) and from
which IP address(es) users can use Telnet/FTP/Web to manage
the Prestige.
Use this screen to enable UPnP on the Prestige.
Log Settings Use this screen to change your Prestige's log settings.
View Log Use this screen to view the logs for the categories that you
selected.
This screen contains administrative and system-related
information.
This screen displays DHCP (Dynamic Host Configuration
Protocol) related information and is READ-ONLY.
This screen lists the devices that are using the Any IP feature to
communicate with the Prestige.
Chapter 2 Introducing the Web Configurator