Problems With The Web Configurator; Problems With Remote Management; Table 146 Troubleshooting The Web Configurator; Table 147 Troubleshooting Remote Management - ZyXEL Communications ADSL VoIP IAD with 802.11g Wireless 2602HW Series User Manual

Prestige 2602HW Series User's Guide

44.8 Problems with the Web Configurator

Table 146 Troubleshooting the Web Configurator

PROBLEM
I cannot access
the web
configurator.

44.9 Problems with Remote Management

Table 147 Troubleshooting Remote Management

PROBLEM
I cannot remotely
manage the
Prestige from the
LAN or WAN.
422
CORRECTIVE ACTION
Refer to .
Make sure that there is not an SMT console session running.
Check that you have enabled web service access. If you have configured a secured
client IP address, your computer's IP address must match it. Refer to the chapter on
remote management for details.
For WAN access, you must configure remote management to allow server access
from the Wan (or all). You must also configure a firewall rule to allow access from the
WAN. Refer to the chapters on remote management and firewall for details.
Your computer's and the Prestige's IP addresses must be on the same subnet for
LAN access.
If you changed the Prestige's LAN IP address, then enter the new one as the URL.
Remove any filters in SMT menu 3.1 (LAN) or menu 11.5 (WAN) that block web
service.
See also Section 44.9 on page
CORRECTIVE ACTION
Refer to Section 18.1.1 on page 229
not be possible.
Use the Prestige's WAN IP address when configuring from the WAN.
Use the Prestige's LAN IP address when configuring from the LAN.
Refer to for instructions on checking your LAN connection.
Refer to Section 44.4 on page 420
connection.
See also Section 44.8 on page
422.
for scenarios when remote management may
for instructions on checking your WAN
422.
Chapter 44 Troubleshooting