Figure 273 Windows Xp: Advanced Tcp/Ip Settings - ZyXEL Communications ADSL VoIP IAD with 802.11g Wireless 2602HW Series User Manual

•

Figure 273 Windows XP: Advanced TCP/IP Settings

6 If you do not know your gateway's IP address, remove any previously installed gateways
in the IP Settings tab and click OK.
Do one or more of the following if you want to configure additional IP addresses:
•
•
•
•
•
•
•
•
If you have a static IP address click Use the following IP Address
and fill in the IP address, Subnet mask, and Default gateway fields.
Click Advanced.
In the IP Settings tab, in IP addresses, click Add.
In TCP/IP Address, type an IP address in IP address and a subnet
mask in Subnet mask, and then click Add.
Repeat the above two steps for each IP address you want to add.
Configure additional default gateways in the IP Settings tab by
clicking Add in Default gateways.
In TCP/IP Gateway Address, type the IP address of the default
gateway in Gateway. To manually configure a default metric (the
number of transmission hops), clear the Automatic metric check box
and type a metric in Metric.
Click Add.
Repeat the previous three steps for each default gateway you want to
add.
Click OK when finished.
Prestige 2602HW Series User's Guide
435