ZyXEL Communications Prestige 314 PLUS User Manual page 186

Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch
Figure 13-7 Menu 24.10 System Maintenance — Time and Date Setting
FIELD
Use Time Server
when Bootup
Time Server IP
Address
Current Time
New Time
Current Date
New Date
13-6
Menu 24.10 - System Maintenance - Time and Date Setting
Use Time Server when Bootup= None
Time Server IP Address= N/A
Current Time:
New Time (hh:mm:ss):
Current Date:
New Date (yyyy-mm-dd):
Time Zone= GMT
Daylight Saving= No
Start Date (mm-dd):
End Date (mm_dd):
Press ENTER to Confirm or ESC to Cancel:
Table 13-3 Time and Date Setting Fields
Enter the time service protocol that your time server sends when you turn on the
Prestige. Not all time servers support all protocols, so you may have to check with
your ISP/network administrator or use trial and error to find a protocol that works.
The main differences between them are the format.
Daytime (RFC 867) format is day/month/year/time zone of the server.
Time (RFC-868) format displays a 4-byte integer giving the total number of
seconds since 1970/1/1 at 0:0:0.
NTP (RFC-1305) is similar to Time (RFC-868).
None is the default value. Enter the time manually. Each time you turn on the
Prestige, the time and date will be reset to 2000-1-1 0:0:0.
Enter the IP address of your time server or its domain name (if your time server is
using DNS). Check with your ISP/network administrator if you are unsure of this
information.
This field displays an updated time only when you reenter this menu.
Enter the new time in hour, minute and second format.
This field displays an updated date only when you reenter this menu.
Enter the new date in year, month and day format.
00 : 00 : 00
11 : 23 : 16
2000 - 01 - 01
2000 - 01 - 01
01 – 01
01 – 01
DESCRIPTION
System Maintenance & Information