Wan Dhcp - ZyXEL Communications Prestige 314 PLUS User Manual

Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch
Figure 11-10 Menu 24.4 — System Maintenance — Diagnostic
Follow the procedure below to get to Menu 24.4 - System Maintenance – Diagnostic.
Step 1. From the main menu, select option 24 to open Menu 24 - System Maintenance.
Step 2.
From this menu, select option 4 (Diagnostic). This will open Menu 24.4 - System Maintenance -
Diagnostic.

11.4.1 WAN DHCP

DHCP functionality can be enabled on the LAN or WAN as shown in Figure 11-11. The Prestige can act
either as a WAN DHCP client (IP Address Assignment field in menu 4 or menu 11.3 is Dynamic and the
Encapsulation field in menu 4 or menu 11 is Ethernet) or "none", i.e., you have a static IP. The WAN
Release and Renewal fields in menu 24.4 conveniently allow you to release and/or renew the assigned WAN
IP address, subnet mask and default gateway in a fashion similar to winipcfg.
11-12
Menu 24.4 - System Maintenance - Diagnostic
TCP/IP
1. Ping Host
2. WAN DHCP Release
3. WAN DHCP Renewal
4. Internet Setup Test
System
11. Reboot System
Enter Menu Selection Number:
Host IP Address= N/A
System Information & Diagnosis