ZyXEL Communications Prestige 314 PLUS User Manual page 161

The following table describes the diagnostic tests available in menu 24.4 for your Prestige and the
connections.
NUMBER
1 Ping Host
2 WAN DHCP Release
3 WAN DHCP Renewal
4 Internet Setup Test
11 Reboot System
Host IP Address
System Information & Diagnosis
Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch
Figure 11-11 WAN & LAN DHCP
Table 11-4 System Maintenance Menu Diagnostic
FIELD DESCRIPTION
Enter 1 to ping any machine (with an IP address) on
your LAN or WAN. Enter its IP address in the Host IP
Address field mentioned in the last row of this table.
Enter 2 to release your WAN DHCP settings.
Enter 3 to renew your WAN DHCP settings. The
renewal timeout is 32 seconds.
Enter 4 to test the Internet Setup. You can also test
the Internet Setup in menu 4 - Internet Access. Please
refer to the chapter- Internet Access for more details.
Enter 11 to reboot the Prestige.
If you entered 1 above, then enter the IP address of
the machine you want to ping in this field.
11-13