Table 3-6 Internet Access Setup Menu Fields - ZyXEL Communications Prestige 314 PLUS User Manual

The following table describes this screen.
FIELD
ISP's Name
Encapsulation
Service Type
Note: xDSL users must choose the Standard option only. The Server IP, My Login IP and My
Password fields are not applicable in this case.
My Login
My Password
Login Server IP
IP Address Assignment
IP Address
IP Subnet Mask
Gateway IP Address
Network Address
Translation
Once you have finished configuring a rule in this menu, press [ENTER] at the message "Press ENTER to
Confirm..." to save your configuration, or press [ESC] to cancel.
3.3.2 PPTP Encapsulation
Point-to-Point Tunneling Protocol (PPTP) is a network protocol that enables transfer of data from a remote
client to a private server, creating a Virtual Private Network (VPN) using TCP/IP-based networks.
Internet Access
Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch

Table 3-6 Internet Access Setup Menu Fields

Enter the name of your Internet Service Provider, e.g., myISP. This
information is for identification purposes only.
Press the [SPACE BAR] and then press [ENTER] to choose Ethernet. The
encapsulation method influences your choices for IP Address.
This is applicable only when you choose Ethernet as your encapsulation
method. Press the [SPACE BAR] to select Standard, RR-Toshiba
(RoadRunner Toshiba authentication method), RR-Manager (RoadRunner
Manager authentication method) or RR-Telstra (RoadRunner Telstra
authentication method). Choose a RoadRunner service type if your ISP is
Time Warner's RoadRunner; otherwise choose Standard.
Enter the login name given to you by your ISP.
Enter the password associated with the login name above.
The Prestige will find the RoadRunner Server IP if this field is left blank. If it
does not, then you must enter the authentication server IP address.
If your ISP did not assign you a fixed IP address, select Dynamic, otherwise
select Static and enter the IP address & subnet mask in the following fields.
Enter the (fixed) IP address assigned to you by your ISP (Static IP Address
Assignment is selected in the previous field).
Enter the subnet mask associated with your static IP.
Enter the gateway IP address associated with your static IP.
Refer to the following chapter for a more detailed discussion on the Single
User Account and NAT. Options are SUA only, Full Feature or None.
DESCRIPTION
3-11