Figure 3-5 Menu 3.2.1 - Ip Alias Setup; Table 3-5 Ip Alias Setup Menu Fields - ZyXEL Communications Prestige 314 PLUS User Manual

Press Space Bar to Toggle.
Follow the instructions in the table shown next to configure IP Alias parameters.
FIELD
IP Alias Choose Yes to configure the LAN network for the Prestige.
IP Address Enter the IP address of your Prestige in dotted decimal notation
IP Subnet Mask Your Prestige will automatically calculate the subnet mask based on
the IP address that you assign. Unless you are implementing
subnetting, use the subnet mask computed by the Prestige.
RIP Direction Press the [SPACE BAR] to select the RIP direction.
Options are None, Both, In Only or Out Only.
Version Press the [SPACE BAR] to select the RIP version.
Options are RIP-1, RIP-2B or RIP-2M.
Incoming Enter the filter set(s) you wish to apply to the incoming traffic
Protocol Filters between this node and the Prestige.
Internet Access
Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch
Menu 3.2.1 - IP Alias Setup
IP Alias 1= No
IP Address= N/A
IP Subnet Mask= N/A
RIP Direction= N/A
Version= N/A
Incoming protocol filters= N/A
Outgoing protocol filters= N/A
IP Alias 2= No
IP Address= N/A
IP Subnet Mask= N/A
RIP Direction= N/A
Version= N/A
Incoming protocol filters= N/A
Outgoing protocol filters= N/A
Enter here to CONFIRM or ESC to CANCEL:
Figure 3-5 Menu 3.2.1 — IP Alias Setup

Table 3-5 IP Alias Setup Menu Fields

DESCRIPTION EXAMPLE
Yes
192.168.2.1
255.255.255.0
None
RIP-1
3-9