PPTP supports on-demand, multi-protocol, and virtual private networking over public networks, such as the
Internet.
The P314 PLUS supports one PPTP server connection at any given time.
3.3.3 Configure PPTP Client
To configure a PPTP client, you must configure My Login and Password fields for PPP connection and
PPTP parameters for PPTP connection.
After configuring the User Name and Password for PPP connection, press [SPACE BAR] in the
Encapsulation field in Menu 4 -Internet Access Setup to choose PPTP as your encapsulation option.
If you choose PPTP in menu 4 you will see the next screen.
The following table contains instructions about the new fields when you choose PPTP in the Encapsulation
field in menu 4.
FIELD
Encapsulation
3-12
Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch
Menu 4 - Internet Access Setup
ISP's Name= myISP
Encapsulation= PPTP
Service Type= N/A
My Login=
My Password= ******
Idle Timeout= 300
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Address=N/A
Network Address Translation = SUA Only
Press ENTER to Confirm or ESC to Cancel:
Figure 3-7 Internet Access Setup (PPTP)
Table 3-7 New Fields in Menu 4 (PPTP) screen
Press the [SPACE BAR] and then press [ENTER] to choose
PPTP. The encapsulation method influences your choices for
IP Address.
DESCRIPTION
EXAMPLE
PPTP
Internet Access