ISP's Name= ChangeMe
Encapsulation= Ethernet
Service Type= Standard
My Login= N/A
My Password= N/A
Login Server IP= N/A
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Address= N/A
Network Address Translation= SUA Only
Press ENTER to Confirm or ESC to Cancel:
From menu 4 shown above, simply choose the SUA Only option from the Network Address Translation
field. This is the Many-to-One mapping discussed in section 4.1.5. The SUA Only read-only option from the
Network Address Translation field in menus 4 and 11.3 is specifically pre-configured to handle this case.
NAT
Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch
Figure 4-14 NAT Example 1
Menu 4 - Internet Access Setup
Figure 4-15 Menu 4 — Internet Access & NAT Example
4-19