Figure 5-1 Menu 11.1 Remote Node Profile For Ethernet Encapsulation; Table 5-1 Fields In Menu 11.1 (Ethernet Encapsulation) - ZyXEL Communications Prestige 314 PLUS User Manual

Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch
Rem Node Name= ChangeMe
Active= Yes
Encapsulation= Ethernet
Service Type= Standard
Service Name= N/A
Outgoing:

Figure 5-1 Menu 11.1 Remote Node Profile for Ethernet Encapsulation

FIELD
Rem Node
Name
Active
Encapsulation
Service Type
Note: xDSL users must choose the Standard option only. The Server IP, My Login IP and My
Service Name
Outgoing
5-2
Menu 11.1 - Remote Node Profile
My Login= N/A
My Password= N/A
Server IP= N/A
Press ENTER to Confirm or ESC to Cancel.

Table 5-1 Fields in Menu 11.1 (Ethernet Encapsulation)

Enter a descriptive name for the remote node. This field can be
up to eight characters.
Press [SPACE BAR] to select Yes (activate remote node) or No
(deactivate remote node).
Ethernet is the default encapsulation. Press the [SPACE BAR] if
you wish to change to PPPoE or PPTP encapsulation.
Press [SPACE BAR] to select from Standard, RR-Toshiba
(RoadRunner Toshiba authentication method), RR-Manager
(RoadRunner Manager authentication method) or, RR-Telstra
(RoadRunner Telstra authentication method). Choose one of the
RoadRunner methods if your ISP is Time Warner's RoadRunner;
otherwise choose Standard.
Password fields are not applicable in this case.
This is valid only when you have chosen PPPoE encapsulation.
If you are using PPPoE encapsulation, then type the name of
your PPPoE service here.
Route= IP
Edit IP= No
Session Options:
Edit Filter Sets= No
Edit Traffic Redirect= No
DESCRIPTION EXAMPLE
LAoffice
Yes
Ethernet
Standard
poellc
Remote Node Setup