ZyXEL Communications Prestige 314 User Manual
  1. Manuals
  2. Brands
  3. ZyXEL Communications Manuals
  4. Gateway
  5. Prestige 314 PLUS
  6. User manual
ZyXEL Communications Prestige 314 User Manual

ZyXEL Communications Prestige 314 User Manual

Broadband sharing gateway with 4-port switch
Hide thumbs Also See for Prestige 314:
Table of Contents

Advertisement

Quick Links

Download this manual
Prestige 314
Broadband Sharing Gateway
with 4-Port Switch
User's Guide
Version 3.25
August 2001

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Prestige 314 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for ZyXEL Communications Prestige 314

Summary of Contents for ZyXEL Communications Prestige 314

  • Page 1 Prestige 314 Broadband Sharing Gateway with 4-Port Switch User’s Guide Version 3.25 August 2001...
  • Page 2 Trademarks ZyNOS (ZyXEL Network Operating System) is a registered trademark of ZyXEL Communications, Inc. Other trademarks mentioned in this publication are used for identification purposes only and may be properties of their respective owners.
  • Page 3 Prestige 314 Broadband Sharing Gateway with 4-Port Switch Federal Communications Commission (FCC) Interference Statement This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: • This device may not cause harmful interference. •...

  • Page 4: Information For Canadian Users

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Information for Canadian Users The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective operation and safety requirements. The Industry Canada label does not guarantee that the equipment will operate to a user's satisfaction.
  • Page 5 Prestige 314 Broadband Sharing Gateway with 4-Port Switch Declaration of Conformity...

  • Page 6: Declaration Of Conformity

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Declaration of Conformity We, the Manufacturer/Importer, ZyXEL Communications Corp. No. 6, Innovation Rd. II, Science-Based Industrial Park, Hsinchu, Taiwan, 300 R.O.C declare that the product Prestige 314 is in conformity with (reference to the specification under which conformity is declared)

  • Page 7: Zyxel Limited Warranty

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch ZyXEL Limited Warranty ZyXEL warrants to the original end user (purchaser) that this product is free from any defects in materials or workmanship for a period of up to two years from the date of purchase. During the warranty period, and upon...

  • Page 8: Customer Support

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Customer Support Please have the following information ready when you contact customer support. • Product model and serial number. • Information in Menu 24.2.1 –System Information. • Warranty Information. • Date that you received your device.

  • Page 9: Table Of Contents

    List of Tables ............................xvi Preface ..............................xix Chapter 1 Getting to Know Your Prestige....................1-1 The Prestige 314 Broadband Sharing Gateway With 4-Port Switch ..........1-1 Features of the Prestige 314 ......................1-1 Broadband Internet Access via Cable or DSL Modem ..............1-4 Applications for Prestige 314 .......................1-4...
  • Page 10 Prestige 314 Broadband Sharing Gateway with 4-Port Switch Remote Node Filter........................5-10 Chapter 6 IP Static Route Setup....................... 6-1 IP Static Route Setup ........................6-2 Chapter 7 Filter Configuration ........................ 7-1 About Filtering..........................7-1 Configuring a Filter Set ....................... 7-4 Example Filter..........................
  • Page 11 Prestige 314 Broadband Sharing Gateway with 4-Port Switch 14.2 Problems with the LAN Interface ....................14-1 14.3 Problems with the WAN Interface....................14-2 14.4 Problems with Internet Access ....................14-2 Appendix A PPPoE............................ A Appendix B PPTP............................. C Appendix C Power Adapter Specifications ....................F Appendix D Hardware Specifications.......................

  • Page 13: List Of Figures

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch List of Figures Figure 1-1 Internet Access Application ......................1-4 Figure 2-1 Front Panel ........................... 2-1 Figure 2-2 Prestige 314 Rear Panel Connections................... 2-2 Figure 2-3 Initial Screen..........................2-4 Figure 2-4 Password Screen........................... 2-5 Figure 2-5 Prestige 314 Main Menu ......................
  • Page 14 Prestige 314 Broadband Sharing Gateway with 4-Port Switch Figure 4-17 Example 3: Menu 15.1.1.1 ......................4-19 Figure 4-18 Example 3: Final Menu 15.1.1 ....................4-20 Figure 4-19 Example 3: Menu 15.2 ......................4-20 Figure 4-20 NAT Example 4 ........................4-21 Figure 4-21 Example 4: Menu 15.1.1.1 — Address Mapping Rule .............4-22 Figure 4-22 Example 4: Menu 15.1.1 —...
  • Page 15 Prestige 314 Broadband Sharing Gateway with 4-Port Switch Figure 9-7 Examples of Error and Information Messages ................9-6 Figure 9-8 Menu 24.3.2 — System Maintenance — UNIX Syslog............... 9-7 Figure 9-9 Call-Triggering Packet Example ....................9-10 Figure 9-10 Menu 24.4 — System Maintenance — Diagnostic ..............9-11 Figure 9-11 WAN &...
  • Page 16 Prestige 314 Broadband Sharing Gateway with 4-Port Switch List of Tables Table 1-1 Internet Access Configuration Checklist ..................1-5 Table 2-1 LED Descriptions ...........................2-1 Table 2-2 Main Menu Commands ........................2-5 Table 2-3 Main Menu Summary........................2-6 Table 2-4 General Setup Menu Field......................2-12 Table 2-5 Configure Dynamic DNS Menu Fields ..................2-13...
  • Page 17 Prestige 314 Broadband Sharing Gateway with 4-Port Switch Table 10-2 General Commands for Third Party FTP Clients............... 10-4 Table 10-3 General Commands for Third Party TFTP Clients ..............10-6 Table 11-1 Budget Management ........................11-3 Table 11-2 Call History Fields ........................11-4 Table 11-3 Time and Date Setting Fields.....................

  • Page 19: Preface

    CD contains HTML help on the embedded web configurator, our handy web-based Internet access wizard designed to get you up and running as soon as possible, the Prestige 314 manual in PDF format, Support Notes (that include a General FAQ, an Advanced FAQ, Applications Notes, Troubleshooting, Reference CI Commands) and bundled software.
  • Page 20 For brevity’s sake, we will use “e.g.” as a shorthand for “for instance” and “i.e.” for “that is” or “in other words” throughout this manual. • The Prestige 314 may be referred to as the Prestige or the P314 in this manual. Occasionally, SMT screens may refer to the Prestige as a router. Preface...

  • Page 21: Getting Started

    Getting Started Getting Started This section helps you connect, install and setup your Prestige to operate on your network and access the Internet.

  • Page 23: Chapter 1 Getting To Know Your Prestige

    The Prestige 314 Broadband Sharing Gateway With 4-Port Switch The Prestige 314 is a dual Ethernet Broadband Sharing Gateway with an integrated 4-port switch and robust network management features for Internet access via external Cable/xDSL modem. Equipped with 10Mbps Ethernet WAN port for WAN, an auto-negotiating 10/100Mbps Ethernet port for LAN and the Network Address Translation (NAT) feature, the Prestige is uniquely suited as a broadband Internet access sharing gateway for small offices and home offices.
  • Page 24 Prestige 314 Broadband Sharing Gateway with 4-Port Switch NAT (Network Address Translation) NAT (Network Address Translation - NAT, RFC 1631) allows the translation of an Internet Protocol address used within one network to a different IP address known within another network. The Prestige can now map multiple global IP addresses to local IP addresses of clients or servers.
  • Page 25 IP address of the desired server. Packet Filtering The Packet Filtering mechanism blocks unwanted traffic from entering/leaving your network. Upgrade Prestige Firmware via LAN The firmware of the Prestige 314 can be upgraded via the LAN. Getting to Know Your Prestige...

  • Page 26: Broadband Internet Access Via Cable Or Dsl Modem

    Applications for Prestige 314 1.4.1 Broadband Internet Access via Cable or DSL Modem A cable modem or xDSL modem can connect to the Prestige 314 for broadband Internet access via Ethernet port on the modem. A typical Internet access application is shown next.

  • Page 27: Table 1-1 Internet Access Configuration Checklist

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Table 1-1 Internet Access Configuration Checklist SMT # FIELD ACTION System Name This field is for identification purposes but because some ISPs check this name you should enter your computer’s “Computer Name”.

  • Page 29: Chapter 2 Hardware Installation & Initial Setup

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Chapter 2 Hardware Installation & Initial Setup This chapter shows you how to connect hardware and perform the initial setup. Front Panel LEDs and Rear Panel Ports 2.1.1 Front Panel LEDs The LEDs on the front panel indicate the operational status of the Prestige.

  • Page 30: Prestige 314 Rear Panel And Connections

    Figure 2-2 Prestige 314 Rear Panel Connections This section outlines how to connect your Prestige 314 to the LAN and the WAN. If you want to connect a cable modem, you must connect the coaxial cable from your cable service to the threaded coaxial cable connector on the back of the cable modem.
  • Page 31 Prestige 314 Broadband Sharing Gateway with 4-Port Switch cable if the enclosed one is too short. After the initial setup, you can modify the configuration remotely through telnet connections. Step 2. Connecting the Prestige to the Broadband Modem Step 2a.

  • Page 32: Additional Installation Requirements

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Additional Installation Requirements In addition to the contents of your package, there are other hardware and software requirements you need before you can install and use your Prestige. These requirements include: A computer(s) with an installed Ethernet NIC (Network Interface Card).

  • Page 33: Navigating The Smt Interface

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Note that if there is no activity for longer than five minutes after you log in, your Prestige will automatically log you out and will display a blank screen. If you see a blank screen, press [ENTER] to bring up the login screen again.

  • Page 34: Figure 2-5 Prestige 314 Main Menu

    Type 99 at the main menu prompt and press [ENTER] to exit the [ENTER]. SMT interface. 2.5.1 Main Menu After you enter the password, the SMT displays the Prestige 314 Main Menu, as shown next. Copyright (c) 1994 - 2001 ZyXEL Communications Corp. Prestige 314 Main Menu Getting Started Advanced Management 1.
  • Page 35 Prestige 314 Broadband Sharing Gateway with 4-Port Switch MENU TITLE FUNCTION Static Routing Setup Configure static routes for bridging and IP in this menu. NAT Setup Use this menu to configure Network Address Translation. Filter Set Configuration Use this menu to provide security via filters.

  • Page 36: Figure 2-6 Getting Started And Advanced Application Smt Menus

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch 2.5.3 SMT Menus at a Glance Figure 2-6 Getting Started and Advanced Application SMT Menus Hardware Installation & Initial Setup...

  • Page 37: Figure 2-7 Advanced Management Smt Menus

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Figure 2-7 Advanced Management SMT Menus Hardware Installation & Initial Setup...

  • Page 38: Changing The System Password

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Changing the System Password The first thing your should do is change the default system password by following the steps shown next. Step 1. Enter 23 in the main menu to open Menu 23 - System Password as shown next.

  • Page 39: General Setup

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch General Setup Menu 1 - General Setup contains administrative and system-related information (shown next). System Name is for identification purposes. However, because some ISPs check this name you should enter your computer’s “Computer Name”.

  • Page 40: Figure 2-9 Menu 1 - General Setup

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Menu 1 - General Setup System Name= ? Domain Name= Edit Dynamic DNS= No Press ENTER to Confirm or ESC to Cancel: Figure 2-9 Menu 1 — General Setup Table 2-4 General Setup Menu Field...

  • Page 41: Figure 2-10 Configure Dynamic Dns

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Menu 1.1 - Configure Dynamic DNS Service Provider = WWW.DynDNS.ORG Active= Yes Host= EMAIL= User= Password= ****** Enable Wildcard= No Press ENTER to confirm or ESC to cancel: Figure 2-10 Configure Dynamic DNS Follow the instructions in the next table to configure Dynamic DNS parameters.

  • Page 42: Wan Setup

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch If you have a private WAN IP address, then you can not use Dynamic DNS. WAN Setup This section describes how to configure the WAN using Menu 2 – WAN Setup. From the main menu, enter 2 to display menu 2.

  • Page 43: Lan Setup

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch FIELD DESCRIPTION EXAMPLE address of the workstation on the LAN whose MAC you are cloning. When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to save your configuration, or press [ESC] at any time to cancel.

  • Page 44: Figure 2-13 Menu 3.1 - Lan Port Filter Setup

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Menu 3.1 – LAN Port Filter Setup Input Filter Sets: protocol filters= 2 device filters= Output Filter Sets: protocol filters= device filters= Press ENTER to Confirm or ESC to Cancel: Figure 2-13 Menu 3.1 — LAN Port Filter Setup Menu 3.2 is discussed in the next part of the manual.

  • Page 45: Chapter 3 Internet Access

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Chapter 3 Internet Access This chapter shows you how to configure the LAN as well as the WAN of your Prestige for Internet access. TCP/IP and DHCP for LAN The Prestige has built-in DHCP server capability that assigns IP addresses and DNS servers to systems that support DHCP client capability.

  • Page 46: Table 3-1 Example Of Network Properties For Lan Servers With Fixed Ip Addresses

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch DNS Server Address Use DNS (Domain Name System) to map a domain name to its corresponding IP address and vice versa, e.g., the IP address of www.zyxel.com is 204.217.0.2. The DNS server is extremely important because without it, you must know the IP address of a computer before you can access it.

  • Page 47: Table 3-2 Private Ip Address Ranges

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch 3.1.4 Private IP Addresses Every computer on the Internet must have a unique IP address. If your networks are isolated from the Internet, e.g., only between your two branch offices, you can assign any IP addresses to the hosts without problems.

  • Page 48: Figure 3-1 Physical Network

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch 3.1.6 IP Multicast Traditionally, IP packets are transmitted in one of either two ways - Unicast (1 sender — 1 recipient) or Broadcast (1 sender — everybody on the network). Multicast delivers IP packets to a group of hosts on the network - not everybody and not just 1.

  • Page 49: Tcp/Ip And Dhcp Ethernet Setup

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch TCP/IP and DHCP Ethernet Setup From the main menu, enter 3 to open Menu 3 - LAN Setup (10/100 Mbps Ethernet) to configure TCP/IP (RFC 1155) and DHCP Ethernet setup. Menu 3 - LAN Setup 1.

  • Page 50: Table 3-3 Lan Dhcp Setup Menu Fields

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Table 3-3 LAN DHCP Setup Menu Fields FIELD DESCRIPTION EXAMPLE DHCP This field enables/disables the DHCP server. If it is set to Server, Server your Prestige will act as a DHCP server. If set to None, DHCP...

  • Page 51: Figure 3-5 Menu 3.2.1 - Ip Alias Setup

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch FIELD DESCRIPTION EXAMPLE RIP-1 Version Press the [SPACE BAR] to select the RIP version. Options are RIP-1, RIP-2B or RIP-2M. (default) Multicast IGMP (Internet Group Multicast Protocol) is a session-layer protocol None used to establish membership in a Multicast group.

  • Page 52: Internet Access Setup

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Table 3-5 IP Alias Setup Menu Fields FIELD DESCRIPTION EXAMPLE IP Alias Choose Yes to configure the LAN network for the Prestige. IP Address Enter the IP address of your Prestige in dotted decimal notation 192.168.2.1...
  • Page 53 Prestige 314 Broadband Sharing Gateway with 4-Port Switch Menu 4 - Internet Access Setup ISP's Name= ChangeMe Encapsulation= Ethernet Service Type= Standard My Login= N/A My Password= N/A Login Server IP= N/A IP Address Assignment= Dynamic IP Address= N/A IP Subnet Mask= N/A...

  • Page 54: Table 3-6 Internet Access Setup Menu Fields

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Table 3-6 Internet Access Setup Menu Fields FIELD DESCRIPTION ISP’s Name Enter the name of your Internet Service Provider, e.g., myISP. This information is for identification purposes only. Press the [SPACE BAR] and the press [ENTER] to choose Ethernet. The Encapsulation encapsulation method influences your choices for IP Address.

  • Page 55: Figure 3-7 Internet Access Setup (Pptp)

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch The P314 supports one PPTP server connection at any given time. 3.3.3 Configure PPTP Client To configure a PPTP client, you must configure My Login and Password fields for PPP connection and PPTP parameters for PPTP connection.
  • Page 56 Prestige 314 Broadband Sharing Gateway with 4-Port Switch 3.3.4 PPPoE Encapsulation The Prestige supports PPPoE (Point-to-Point Protocol over Ethernet). You can use PPPoE encapsulation only when you’re using the Prestige with an xDSL modem as the WAN device. PPPoE is an IETF Draft standard specifying how a host personal computer interacts with a broadband modem (i.e.

  • Page 57: Internet Test Setup

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Menu 4 - Internet Access Setup ISP's Name= ChangeMe Encapsulation= PPPoE Service Type= N/A My Login= My Password= ******** Idle Timeout= 300 IP Address Assignment= Dynamic IP Address= N/A IP Subnet Mask= N/A...

  • Page 58: Basic Setup Complete

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Start dialing for node <ChangeMe>... ### Hit any key to continue.### $$$ DIALING dev=a ch=0..$$$ OUTGOING-CALL phone() $$$ PPTP: Start tunnel setup, send SCCRQ $$$ PPTP: OCRQ sent $$$ CALL CONNECT speed<10000000> type<10> chan<0>...

  • Page 60: Advanced Applications

    Advanced Applications Advanced Applications This section describes the advanced applications of your Prestige, such as NAT, Remote Node Setup and IP Static Route Setup.

  • Page 61: Chapter 4 Network Address Translation (Nat)

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Chapter 4 Network Address Translation (NAT) This chapter discusses how to configure NAT on the Prestige. Introduction NAT (Network Address Translation - NAT, RFC 1631) is the translation of the IP address of a host in a packet, e.g., the source address of an outgoing packet, used within one network to a different IP address...

  • Page 62: What Nat Does

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch NAT never changes the IP address (either local or global) of an outside host. 4.1.2 What NAT Does In the simplest form, NAT changes the source IP address in a packet received from a subscriber (the inside local address) to another (the inside global address) before forwarding the packet to the WAN side.

  • Page 63: Figure 4-1 How Nat Works

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Figure 4-1 How NAT Works 4.1.4 NAT Application The following figure illustrates a possible NAT application, where three inside LANs (logical LANs using IP Alias) behind the Prestige can communicate with three distinct WAN networks. More examples follow at the...

  • Page 64: Figure 4-2 Nat Application With Ip Alias

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Figure 4-2 NAT Application With IP Alias 4.1.5 NAT Mapping Types NAT supports five types of IP/port mapping. They are: One to One: In One-to-One mode, the Prestige maps one local IP address to one global IP address.

  • Page 65: Using Nat

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Server: This type allows you to specify inside servers of different services behind the NAT to be accessible to the outside world. Port numbers do not change for One-to-One and Many-to-Many-No Overload NAT mapping types.

  • Page 66: Figure 4-3 Menu 4 - Applying Nat For Internet Access

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch The Prestige also supports Full Feature NAT to map multiple global IP addresses to multiple private LAN IP addresses of clients or servers using mapping types as outlined in Table 4-2. 1. Choose SUA Only if you have just one public WAN IP address for your Prestige.

  • Page 67: Nat Setup

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Menu 11.3 - Remote Node Network Layer Options IP Address Assignment= Dynamic IP Address: N/A IP Subnet Mask= N/A Gateway IP Addr= N/A Network Address Translation= Full Feature Metric= 1 Private= No...

  • Page 68: Figure 4-5 Menu 15 - Nat Setup

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Menu 15 — NAT Setup Address Mapping Sets Server Set Enter Menu Selection Number: Figure 4-5 Menu 15 — NAT Setup 4.3.1 Address Mapping Sets Enter 1 to bring up Menu 15.1 — Address Mapping Sets.

  • Page 69: Figure 4-7 Menu 15.1.255 - Sua Address Mapping Rules

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Menu 15.1.255 - Address Mapping Rules Set Name= SUA Local Start IP Local End IP Global Start IP Global End IP Type --------------- --------------- --------------- --------------- ------ 0.0.0.0 255.255.255.255 0.0.0.0 0.0.0.0 Server Press ENTER to Confirm or ESC to Cancel: Figure 4-7 Menu 15.1.255 —...

  • Page 70: Figure 4-8 Menu 15.1.1 - First Set

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch FIELD DESCRIPTION EXAMPLE multiple servers of different types behind NAT to this machine. See later for some examples. Once you have finished configuring a rule in this menu, press [ENTER] at the message “Press ENTER to Confirm…”...
  • Page 71 Prestige 314 Broadband Sharing Gateway with 4-Port Switch Now if you delete rule 4, rules 5 to 7 will be pushed up by 1 rule, so as old rule 5 becomes rule 4, old rule 6 becomes rule 5 and old rule 7 becomes rule 6.

  • Page 72: Figure 4-9 Menu 15.1.1.1 - Editing/Configuring An Individual Rule In A Set

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Menu 15.1.1.1 Address Mapping Rule Type= One-to-One Local IP: Start= = N/A Global IP: Start= = N/A Press ENTER to Confirm or ESC to Cancel: Press Space Bar to Toggle. Figure 4-9 Menu 15.1.1.1 — Editing/Configuring an Individual Rule in a Set Table 4-6 Menu 15.1.1.1 —...

  • Page 73: Nat Server Sets - Port Forwarding

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch NAT Server Sets – Port Forwarding A NAT server set is a list of inside (behind NAT on the LAN) servers, for example, web or FTP, that you can make visible to the outside world even though NAT makes your whole inside network appear as a single machine to the outside world.

  • Page 74: Figure 4-10 Menu 15.2 - Nat Server Setup

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch SERVICES PORT NUMBER SNMP (Simple Network Management Protocol) SNMP trap PPTP (Point-to-Point Tunneling Protocol) 1723 4.4.1 Configuring a Server behind NAT Follow these steps to configure a server behind NAT: Step 1.

  • Page 75: General Nat Examples

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Figure 4-11 Multiple Servers Behind NAT Example General NAT Examples 4.5.1 Internet Access Only In the following Internet access example, you only need one rule where all your ILAs (Inside Local addresses) map to one dynamic IGA (Inside Global Address) assigned by your ISP.

  • Page 76: Figure 4-13 Menu 4 - Internet Access & Nat Example

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Menu 4 - Internet Access Setup ISP's Name= ChangeMe Encapsulation= Ethernet Service Type= Standard My Login= N/A My Password= N/A Login Server IP= N/A IP Address Assignment= Dynamic IP Address= N/A IP Subnet Mask= N/A...
  • Page 77 Prestige 314 Broadband Sharing Gateway with 4-Port Switch In this case, you do exactly as above (use the convenient pre-configured SUA Only set) and also go to menu 15.2 to specify the Inside Server behind the NAT as shown later.
  • Page 78 Prestige 314 Broadband Sharing Gateway with 4-Port Switch Figure 4-15 NAT Example 3 Step 1. In this case you need to configure Address Mapping Set 1 from Menu 15.1 - Address Mapping Sets. Therefore you must choose the Full Feature option from the Network Address Translation field (in menu 4 or menu 11.3) in Figure 4-16.
  • Page 79 Prestige 314 Broadband Sharing Gateway with 4-Port Switch Menu 11.3 - Remote Node Network Layer Options IP Address Assignment= Dynamic IP Address= N/A IP Subnet Mask= N/A Gateway IP Addr= N/A Network Address Translation= Full Feature Metric= 1 Private= No...
  • Page 80 Prestige 314 Broadband Sharing Gateway with 4-Port Switch Menu 15.1.1 - Address Mapping Rules Set Name= Example3 Local Start IP Local End IP Global Start IP Global End IP Type --------------- --------------- --------------- --------------- ------ 1. 192.168.1.10 10.132.50.1 192.168.1.11 10.132.50.2 3.
  • Page 81 Prestige 314 Broadband Sharing Gateway with 4-Port Switch 4.5.4 Example 4: NAT Unfriendly Application Programs Some applications do not support NAT Mapping using TCP or UDP port address translation. In this case it is better to use Many-to-Many No Overload mapping as port numbers do not change for Many-to-Many No Overload (and One-to-One) NAT mapping types.

  • Page 82: Figure 4-21 Example 4: Menu 15.1.1.1 - Address Mapping Rule

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Menu 15.1.1.1 Address Mapping Rule Type= Many-to-Many No Overload Local IP: Start= 192.168.1.10 = 192.168.1.12 Global IP: Start= 10.132.50.1 = 10.132.50.3 Press ENTER to Confirm or ESC to Cancel: Figure 4-21 Example 4: Menu 15.1.1.1 — Address Mapping Rule After you’ve configured your rule, you should be able to check the settings in menu 15.1.1 as shown next.

  • Page 83: Chapter 5 Remote Node Setup

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Chapter 5 Remote Node Setup This chapter shows you how to configure a remote node. A remote node is required for placing calls to a remote gateway. A remote node represents both the remote gateway and the network behind it across a WAN connection.

  • Page 84: Table 5-1 Fields In Menu 11.1 (Ethernet Encapsulation)

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Table 5-1 Fields in Menu 11.1 (Ethernet Encapsulation) FIELD DESCRIPTION EXAMPLE Rem Node Name Enter a descriptive name for the remote node. This field can LAoffice be up to eight characters. Active Press [SPACE BAR] to select Yes (activate remote node) or No (deactivate remote node).

  • Page 85: Figure 5-2 Remote Node Profile For Pptp Encapsulation

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch FIELD DESCRIPTION EXAMPLE Session Options This field leads to another “hidden” menu. Use the [SPACE BAR] to select Yes and press [ENTER] to open menu 11.5 Edit Filter sets to edit the filter sets. See the Remote Node Filter section for more details.
  • Page 86 Prestige 314 Broadband Sharing Gateway with 4-Port Switch FIELD DESCRIPTION EXAMPLE menu 11.3 to check the IP Address setting once you have selected the encapsulation method. My IP Addr Enter the IP address of the WAN Ethernet port. 10.0.0.140 Server IP Addr Enter the IP address of the ANT modem.

  • Page 87: Figure 5-3 Menu 11.1 Remote Node Profile For Pppoe Encapsulation

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Operationally, PPPoE saves significant effort for both the end user and ISP/carrier, as it requires no specific configuration of the broadband modem at the customer site. By implementing PPPoE directly on the Prestige (rather than individual computers), the computers on the LAN do not need PPPoE software installed, since the Prestige does that part of the task.

  • Page 88: Editing Tcp/Ip Options (With Ethernet Encapsulation)

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch FIELD DESCRIPTION EXAMPLE Allocated Budget The field sets a ceiling for outgoing call time for this (min) remote node. The default for this field is 0 meaning no budget control. Period(hr) This field is the time period that the budget should be reset.

  • Page 89: Figure 5-4 Remote Node Network Layer Options

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Menu 11.3 - Remote Node Network Layer Options IP Address Assignment= Dynamic IP Address= N/A IP Subnet Mask= N/A Gateway IP Addr= N/A Network Address Translation= SUA only Metric= 1 Private= No...

  • Page 90: Figure 5-5 Remote Node Network Layer Options

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch FIELD DESCRIPTION EXAMPLE remote node in its RIP broadcasts. If set to Yes, this route is kept private and not included in RIP broadcast. If No, the route to this remote node will be propagated to other hosts through RIP broadcasts.

  • Page 91: Table 5-5 Remote Node Network Layer Options Menu Fields

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch The next table gives you instructions about configuring remote node network layer options. Table 5-5 Remote Node Network Layer Options Menu Fields FIELD DESCRIPTION EXAMPLE If your ISP did not assign you an explicit IP address, select Dynamic;...

  • Page 92: Remote Node Filter

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch FIELD DESCRIPTION EXAMPLE None Multicast IGMP (Internet Group Multicast Protocol) is a session-layer protocol used to establish membership in a Multicast group. The Prestige supports both IGMP version 1 (IGMP-v1) and version 2 (IGMP-v2).

  • Page 93: Figure 5-7 Remote Node Filter

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Menu 11.5 - Remote Node Filter Input Filter Sets: protocol filters= 5 device filters= Output Filter Sets: protocol filters= 1 device filters= Call Filter Sets: protocol filters= 1 device filters= Enter here to CONFIRM or ESC to CANCEL:...

  • Page 95: Chapter 6 Ip Static Route Setup

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Chapter 6 IP Static Route Setup This chapter shows you how to configure static routes with your Prestige. Static routes tell the Prestige routing information that it cannot learn automatically through other means. This can arise in cases where RIP is disabled on the LAN.

  • Page 96: Figure 6-2 Menu 12 - Ip Static Route Setup

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch IP Static Route Setup You configure IP static routes in menu 12. 1, by selecting one of the IP static routes as shown below. Enter 12 from the main menu. Menu 12 - IP Static Route Setup 1.

  • Page 97: Table 6-1 Ip Static Route Menu Fields

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Table 6-1 IP Static Route Menu Fields FIELD DESCRIPTION Route # This is the index number of the static route that you chose in menu 12. Route Name Enter a descriptive name for this route. This is for identification purposes only.

  • Page 99: Advanced Management

    Advanced Management Advanced Management This section provides information on Filter Configuration, SNMP Configuration, System Information and Diagnosis, Firmware and Configuration File Maintenance, System Maintenance and Call Scheduling.

  • Page 101: Chapter 7 Filter Configuration

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Chapter 7 Filter Configuration This chapter shows you how to create and apply filter(s). About Filtering Your Prestige uses filters to decide whether to allow passage of a data packet and/or to make a call. There are two types of filter applications: data filtering and call filtering.

  • Page 102: The Filter Structure Of The Prestige

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch For incoming packets, your Prestige applies data filters only. Packets are processed depending upon whether a match is found. The following sections describe how to configure filter sets 7.1.1 The Filter Structure of the Prestige A filter set consists of one or more filter rules.

  • Page 103: Figure 7-2 Filter Rule Process

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Start Packet into Filter Fetch First Filter Set Filter Set Fetch Next Fetch First Filter Set Filter Rule Fetch Next Filter Rule Execute Filter Next Filter Set Next Filter Rule Available? Available?

  • Page 104: Configuring A Filter Set

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Configuring a Filter Set To configure a filter set, follow the procedure below. Select option 21 from the main menu to display menu Step 6. Enter 1 to display the following menu.

  • Page 105: Figure 7-4 Netbios_Wan Filter Rules Summary

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Menu 21.1 - Filter Rules Summary # A Type Filter Rules M m n - - ---- -------------------------------------------- --------- - - - 1 Y IP Pr=6, SA=0.0.0.0, DA=0.0.0.0, DP=137 N D N...

  • Page 106: Figure 7-7 Snmp_Wan Filter Rules Summary

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Menu 21.5 – Filter Rules Summary # A Type Filter Rules M m n - - ---- --------------------------------------------------------------- - - - 1 Y IP Pr=17, SA=0.0.0.0, DA=0.0.0.0, DP=161 N D F Enter Filter Rule Number (1-6) to Configure: Figure 7-7 SNMP_WAN Filter Rules Summary 7.2.1 Filter Rules Summary Menu...

  • Page 107: Table 7-2 Rule Abbreviations Used

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Table 7-2 Rule Abbreviations Used ABBREVIATION DESCRIPTION Protocol Source Address Source Port number Destination Address Destination Port number Offset Length Refer to the next section for information on configuring the filter rules.

  • Page 108: Figure 7-8 Menu 21.1.1 - Tcp/Ip Filter Rule

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Menu 21.1.1 - TCP/IP Filter Rule Filter #: 1,1 Filter Type= TCP/IP Filter Rule Active= Yes IP Protocol= 6 IP Source Route= No Destination: IP Addr= 0.0.0.0 IP Mask= 0.0.0.0 Port #= 137 Port # Comp= Equal Source: IP Addr= 0.0.0.0...
  • Page 109 Prestige 314 Broadband Sharing Gateway with 4-Port Switch FIELD DESCRIPTION EXAMPLE the packet against the value given in Destination Port # field. Options are: None, Less, Greater, Equal or Not Equal. Source IP Address Enter the source IP Address of the packet you wish to IP Address filter.
  • Page 110 Prestige 314 Broadband Sharing Gateway with 4-Port Switch FIELD DESCRIPTION EXAMPLE Once you have completed filling in Menu 21.1.1.1 - TCP/IP Filter Rule, press [ENTER] at the message “Press Enter to Confirm to save your configuration, or press [ESC] to cancel”. This data will now be displayed on Menu 21.1.1 - Filter Rules Summary.

  • Page 111: Figure 7-9 Executing An Ip Filter

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Packet into IP Filter Filter Active? Apply SrcAddrMask to Src Addr Check Src Not Matched IP Addr Matched Apply DestAddrMask to Dest Addr Check Dest Not Matched IP Addr Matched Check Not Matched...

  • Page 112: Figure 7-10 Menu 21.4.1 - Generic Filter Rule

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch 7.2.4 Generic Filter Rule This section shows you how to configure a generic filter rule. The purpose of generic rules is to allow you to filter non-IP packets. For IP, it is generally easier to use the IP rules directly.
  • Page 113 Prestige 314 Broadband Sharing Gateway with 4-Port Switch Field Description EXAMPLE Select Yes to turn on the filter rule. Active Offset Enter the starting byte of the data portion in the packet that you wish to compare. The range for this field is from 0 to 255.

  • Page 114: Example Filter

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Figure 7-11 Filter Example Example Filter Let’s look at an example to block outside users from telnetting into the Prestige. See the included support CD for more example filters. Step 1. Enter 21 from the main menu to open Menu 21 - Filter Set Configuration.

  • Page 115: Figure 7-12 Example Filter - Menu 21.3.1

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Press [SPACE BAR] to choose Menu 21.7.1 - TCP/IP Filter Rule this filter rule type. The first Filter #: 7,1 filter rule type determines all Filter Type= TCP/IP Filter Rule Active= Yes...
  • Page 116 Prestige 314 Broadband Sharing Gateway with 4-Port Switch Menu 21.7 - Filter Rules Summary # A Type Filter Rules M m n - - ---- --------------------------------------------------------------- - - - 1 Y IP Pr=6, SA=0.0.0.0, DA=0.0.0.0, DP=21 N D N Enter Filter Rule Number (1-6) to Configure: 2...

  • Page 117: Filter Types And Nat

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Menu 21.7 - Filter Rules Summary # A Type Filter Rules M m n - - ---- ------------------------------------------------------------ 1 Y IP Pr=6, SA=0.0.0.0, DA=0.0.0.0, DP=21 N D N 2 Y IP Pr=6, SA=0.0.0.0, DA=0.0.0.0, DP=23...

  • Page 118: Applying A Filter And Factory Defaults

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Figure 7-15 Protocol and Device Filter Sets Applying a Filter and Factory Defaults This section shows you where to apply the filter(s) after you design it (them). Sets of factory default filter rules have been configured in menu 21 to prevent NetBIOS traffic from triggering calls and block incoming telnet, FTP and HTTP connections.

  • Page 119: Figure 7-17 Filtering Remote Node Traffic

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch 7.5.2 Remote Node Filters Go to menu 11.5 (shown next – note that call filter sets are only present for PPPoE encapsulation) and enter the number(s) of the filter set(s) as appropriate. You can cascade up to four filter sets by entering their numbers separated by commas.

  • Page 121: Chapter 8 Snmp Configuration

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Chapter 8 SNMP Configuration This chapter explains SNMP configuration menu 22. SNMP is only available if TCP/IP is configured. About SNMP Simple Network Management Protocol is a protocol used for exchanging management information between network devices.

  • Page 122: Supported Mibs

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch An SNMP managed network consists of two main components: agents and a manager. An agent is a management software module that resides in a managed device (the Prestige). An agent translates the local management information from the managed device into a form compatible with SNMP.

  • Page 123: Snmp Traps

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Menu 22 - SNMP Configuration SNMP: Get Community= public Set Community= public Trusted Host= 0.0.0.0 Trap: Community= public Destination= 0.0.0.0 Press ENTER to Confirm or ESC to Cancel: Figure 8-2 Menu 22 — SNMP Configuration The following table describes the SNMP configuration parameters.

  • Page 124: Table 8-2 Snmp Traps

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Table 8-2 SNMP Traps TRAP # TRAP NAME DESCRIPTION coldStart (defined in RFC-1215) A trap is sent after booting (power on). warmStart (defined in RFC-1215) A trap is sent after booting (software reboot).

  • Page 125: Chapter 9 System Information & Diagnosis

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Chapter 9 System Information & Diagnosis This chapter covers SMT menus 24.1 to 24 .4. This chapter covers the diagnostic tools that help you to maintain your Prestige. These tools include updates on system status, port status, log and trace capabilities and upgrades for the system software.

  • Page 126: Figure 9-2 Menu 24.1 - System Maintenance - Status

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch The table below describes the fields present in Menu 24.1 - System Maintenance - Status. It should be noted that these fields are READ-ONLY and are meant to be used for diagnostic purposes.

  • Page 127: System Information And Console Port Speed

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch FIELD DESCRIPTION Ethernet Address The LAN port Ethernet address. IP Address The LAN port IP address. IP Mask The LAN port IP mask. DHCP The LAN port DHCP role. Ethernet Address The WAN port Ethernet address.

  • Page 128: Figure 9-4 Menu 24.2.1 System Maintenance - Information

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch 9.2.1 System Information Menu 24.2.1 - System Maintenance - Information gives you information about your system as shown below. More specifically, it gives you information on your routing protocol, country code, Ethernet address, IP address, etc.

  • Page 129: Log And Trace

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch 9.2.2 Console Port Speed You can change the speed of the console port through Menu 24.2.2 — Console Port Speed. Your Prestige supports 9600 (default), 19200, 38400, 57600, and 115200 bps for the console port. Use the [SPACE BAR] to select the desired speed in menu 24.2.2, as shown next.

  • Page 130: Figure 9-6 Menu 23.3 System Maintenance - Log And Trace

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Menu 24.3 - System Maintenance - Log and Trace 1. View Error Log 2. UNIX Syslog 4. Call-Triggering Packet Please enter selection Figure 9-6 Menu 23.3 System Maintenance — Log and Trace Examples of typical error and information messages are presented in the figure below.

  • Page 131: Figure 9-8 Menu 24.3.2 - System Maintenance - Unix Syslog

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Menu 24.3.2 -- System Maintenance - UNIX Syslog Syslog: Active= No Syslog IP Address= ? Log Facility= Local 1 Types: CDR= No Packet triggered= No Filter log= No PPP log= No Press ENTER to Confirm or ESC to Cancel: Press Space Bar to Toggle.

  • Page 132: Packet Triggered

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Your Prestige sends five types of syslog messages. Some examples (not P314 specific) of these syslog messages with their message formats are shown next: 1. CDR CDR Message Format SdcmdSyslogSend( SYSLOG_CDR, SYSLOG_INFO, String );...
  • Page 133 Prestige 314 Broadband Sharing Gateway with 4-Port Switch 3. Filter log Filter log Message Format SdcmdSyslogSend(SYSLOG_FILLOG, SYSLOG_NOTICE, String ); String = IP[Src=xx.xx.xx.xx Dst=xx.xx.xx.xx prot spo=xxxx dpo=xxxx] S04>R01mD IP[…] is the packet header and S04>R01mD means filter set 4 (S) and rule 1 (R), match (m) drop (D).

  • Page 134: Diagnostic

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Note: This feature is available for PPTP/PPPoE Encapsulation only IP Frame: ENET0-RECV Size: Time: 17:02:44.262 Frame Type: IP Header: IP Version Header Length = 20 Type of Service = 0x00 (0) Total Length...

  • Page 135: Figure 9-10 Menu 24.4 - System Maintenance - Diagnostic

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Menu 24.4 - System Maintenance - Diagnostic TCP/IP 1. Ping Host 2. WAN DHCP Release 3. WAN DHCP Renewal 4. Internet Setup Test System 11. Reboot System Enter Menu Selection Number: Host IP Address= N/A Figure 9-10 Menu 24.4 —...

  • Page 136: Figure 9-11 Wan & Lan Dhcp

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Figure 9-11 WAN & LAN DHCP The following table describes the diagnostic tests available in menu 24.4 for your Prestige and the connections. Table 9-4 System Maintenance Menu Diagnostic NUMBER FIELD DESCRIPTION...

  • Page 137: Chapter 10 Firmware And Configuration Maintenance

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Chapter 10 Firmware and Configuration Maintenance This chapter tells you how to back up and restore your configuration file as well as upload new firmware and a new configuration file. 10.1 Filename Conventions The configuration file (often called the romfile or rom-0) contains the factory default settings in the menus such as password, DHCP Setup, TCP/IP Setup, etc.

  • Page 138: 10.2 Backup Configuration

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Table 10-1 Filename Conventions FILE TYPE INTERNAL EXTERNAL DESCRIPTION NAME NAME Configuration Rom-0 *.rom This is the configuration filename on the File Prestige. Uploading the rom-0 file replaces the entire ROM file system, including your...
  • Page 139 Prestige 314 Broadband Sharing Gateway with 4-Port Switch Menu 24.5 - System Maintenance - Backup Configuration To transfer the configuration file to your workstation, follow the procedure below: 1. Launch the FTP client on your workstation. 2. Type "open" and the IP address of your router. Then type "root" and SMT password as requested.

  • Page 140: Figure 10-2 Ftp Session Example

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Example of FTP Commands from the DOS Prompt 331 Enter PASS command Password: 230 Logged in ftp> bin 200 Type I OK ftp> get rom-0 zyxel.rom 200 Port command okay 150 Opening data connection for STOR ras 226 File received OK ftp: 16384 bytes sent in 1.10Seconds 297.89Kbytes/sec.

  • Page 141: Backup Configuration Using Tftp

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch • There is a SMT console session running. 10.2.3 Backup Configuration Using TFTP The Prestige supports the up/downloading of the firmware and the configuration file using TFTP (Trivial File Transfer Protocol) over LAN. Although TFTP should work over WAN as well, it is not recommended.

  • Page 142: Figure 10-3 System Maintenance - Backup Configuration

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Third Party TFTP Clients The following table describes some of the fields that you may see in third party TFTP clients. Table 10-3 General Commands for Third Party TFTP Clients COMMAND DESCRIPTION Host Enter the IP address of the Prestige.

  • Page 143: 10.3 Restore Configuration

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Step 3. Run the HyperTerminal program by clicking Transfer, then Receive File as shown in the following screen. Type a location for storing the configuration file or click Browse to look for one.

  • Page 144: Restore Using Ftp Or Tftp

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch 10.3.1 Restore Using FTP or TFTP For details about backup using (T)FTP please refer to earlier sections on FTP and TFTP file upload in this chapter. Menu 24.6 -- System Maintenance - Restore Configuration...

  • Page 145: Figure 10-8 Restore Using Ftp Or Tftp Session Example

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Restore Using FTP or TFTP Session Example ftp> put config.rom rom-0 200 Port command okay 150 Opening data connection for STOR rom-0 226 File received OK 221 Goodbye for writing flash ftp: 16384 bytes sent in 0.06Seconds 273.07Kbytes/sec.

  • Page 146: 10.4 Uploading Firmware And Configuration Files

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Type the configuration file’s location, or click Browse to search for it. Choose the Xmodem protocol. Then click Send. Figure 10-11 Restore Configuration Example Step 4. After a successful restoration you will see the following screen. Press any key to restart the Prestige and return to the SMT menu.

  • Page 147: Figure 10-13 Telnet Into Menu 24.7.1 - Upload System Firmware

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Menu 24.7.1 - System Maintenance - Upload System Firmware To upload the system firmware, follow the procedure below: 1. Launch the FTP client on your workstation. 2. Type "open" and the IP address of your system. Then type "root" and SMT password as requested.

  • Page 148: Figure 10-15 Ftp Session Example Of Firmware File Upload

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch FTP File Upload Command from the DOS Prompt Example Step 1. Launch the FTP client on your computer. Step 2. Enter “open”, followed by a space and the IP address of your Prestige.

  • Page 149: Uploading Via Console Port

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Step 1. Use telnet from your computer to connect to the Prestige and log in. Because TFTP does not have any security checks, the Prestige records the IP address of the telnet client and accepts TFTP requests only from this address.

  • Page 150: Figure 10-16 Menu 24.7.1 As Seen Using The Console Port

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Menu 24.7.1 - System Maintenance - Upload Router Firmware To upload router firmware: 1. Enter "y" at the prompt below to go into debug mode. 2. Enter "atur" after "Enter Debug Mode" message.

  • Page 151: Figure 10-18 Menu 24.7.2 As Seen Using The Console Port

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Menu 24.7.2 - System Maintenance - Upload Router Configuration File To upload router configuration file: 1. Enter "y" at the prompt below to go into debug mode. 2. Enter "atlc" after "Enter Debug Mode" message.

  • Page 152: Figure 10-19 Example Xmodem Upload

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Type the configuration file’s location, or click Browse to search for it. Choose the Xmodem protocol. Then click Send. Figure 10-19 Example Xmodem Upload After the configuration upload process has completed, restart the Prestige by entering “atgo”.

  • Page 153: Chapter 11 System Maintenance & Information

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Chapter 11 System Maintenance & Information This chapter leads you through SMT menus 24.8 to 24.11. 11.1 Command Interpreter Mode The Command Interpreter (CI) is a part of the main router firmware. The CI provides much of the same functionality as the SMT, while adding some low-level setup and diagnostic functions.

  • Page 154: 11.2 Call Control Support

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch 11.2 Call Control Support The Prestige provides two call control functions: budget management and call history. Please note that this menu is only applicable when Encapsulation is set to PPPoE or PPTP in menu 4 or menu 11.1.

  • Page 155: Table 11-1 Budget Management

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch The total budget is the time limit on the accumulated time for outgoing calls to a remote node. When this limit is reached, the call will be dropped and further outgoing calls to that remote node will be blocked. After each period, the total budget is reset.

  • Page 156: 11.3 Time And Date Setting

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Menu 24.9.2 - Call History Phone Number Rate #call Total Enter Entry to Delete(0 to exit): Figure 11-5 Call History Table 11-2 Call History Fields FIELD DESCRIPTION Phone Number The PPPoE service names are shown here.

  • Page 157: Figure 11-6 Menu 24 - System Maintenance

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Select menu 24 in the main menu to open Menu 24 - System Maintenance, as shown next. Menu 24 - System Maintenance System Status System Information and Console Port Speed Log and Trace...

  • Page 158: Table 11-3 Time And Date Setting Fields

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Table 11-3 Time and Date Setting Fields FIELD DESCRIPTION Use Time Server Enter the time service protocol that your time server sends when you turn on the when Bootup Prestige. Not all time servers support all protocols, so you may have to check with your ISP/network administrator or use trial and error to find a protocol that works.

  • Page 159: 11.4 Remote Management Setup

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch iii. 24-hour intervals after booting. 11.4 Remote Management Setup Remote management setup is for managing Telnet, Web and FTP services. You can customize the service port, access interface, and the secured client IP address to enhance security and flexibility.

  • Page 160: 11.5 Boot Commands

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch FIELD DESCRIPTION EXAMPLE Server Port Many residential broadband ISP accounts do not allow you to run any server processes (such as a Web or FTP server) from your location. If you wish to run such a server from your location, you will have to change the default service port number.
  • Page 161 Prestige 314 Broadband Sharing Gateway with 4-Port Switch ATHE ATBAx Enter to view all available Prestige boot module commands as shown in the next screen. allows you to change the console port speed. The x denotes the number preceding the colon to give the console port speed following the colon in the list of numbers that follows;...

  • Page 162: Figure 11-10 Boot Module Commands

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch ======= Debug Command Listing ======= just answer OK ATHE print help ATBAx change baudrate. 1:38.4k, 2:19.2k, 3:9.6k 4:57.6k 5:115.2k ATENx,(y) set BootExtension Debug Flag (y=password) ATSE show the seed of password generator...

  • Page 163: Chapter 12 Telnet Configuration And Capabilities

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Chapter 12 Telnet Configuration and Capabilities This chapter covers the Telnet configuration and capabilities of the prestige. 12.1 About Telnet Configuration Before the Prestige is properly setup for TCP/IP, the only option for configuring it is through the console port.

  • Page 164: System Timeout

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch 12.3.2 System Timeout There is a system timeout of five minutes (300 seconds) for either the console port or telnet. Your Prestige will automatically log you out if you do nothing in this timeout period, except when it is continuously updating the status in menu 24.1.

  • Page 165: Chapter 13 Call Scheduling

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Chapter 13 Call Scheduling This chapter shows you how to setup call time periods for remote nodes. 13.1 Introduction The call scheduling feature allows the Prestige to manage a remote node and dictate when a remote node should be called and for how long.

  • Page 166: 13.3 Schedule Set Setup

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch To delete a schedule set, enter the set number and press the [SPACE BAR] in the Edit Name field. 13.3 Schedule Set Setup To setup a schedule set, select the schedule set you want to setup from menu 26 (1-12), press [ENTER] and then type in a name for the set.

  • Page 167: 13.4 Applying Schedule Sets To Remote Nodes

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch FIELD DESCRIPTION EXAMPLE selected, the schedule rule deletes automatically after the scheduled time elapses. If you select Once in the How Often field above, enter the date the Once: 2001 – 01 – 01 set should activate in year-month-day format.

  • Page 168: Figure 13-3 Applying Schedule Sets To A Remote Node Example (Pppoe Encapsulation)

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Menu 11.1 - Remote Node Profile Rem Node Name= ChangeMe Route= IP Active= Yes Encapsulation= PPPoE Edit IP= No Service Type= Standard Telco Option: Service Name= Allocated Budget(min)= 0 Outgoing: Period (hr)= 0...
  • Page 170 Troubleshooting and Additional Information Troubleshooting and Additional Information This section provides information about solving common problems, some Appendices, as well as a Glossary and Index.

  • Page 171: Chapter 14 Troubleshooting

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Chapter 14 Troubleshooting This chapter covers the potential problems and possible remedies. After each problem description, some instructions are provided to help you to diagnose and to solve the problem. See the included CD for further information.

  • Page 172: 14.3 Problems With The Wan Interface

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch 14.3 Problems with the WAN Interface Table 14-3 Troubleshooting the WAN interface PROBLEM CORRECTIVE ACTION Cannot get a WAN IP address The WAN IP address is provided when the ISP recognizes the user from the ISP.

  • Page 173: Appendix Apppoe

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Appendix A PPPoE PPPoE in Action An ADSL modem bridges a PPP session over Ethernet (PPP over Ethernet, RFC 2516) from your PC to an ATM PVC (Permanent Virtual Circuit) which connects to a xDSL Access Concentrator where the PPP session terminates (see the next figure).
  • Page 174 Prestige 314 Broadband Sharing Gateway with 4-Port Switch How PPPoE Works The PPPoE driver makes the Ethernet appear as a serial link to the PC and the PC runs PPP over it, while the modem bridges the Ethernet frames to the Access Concentrator (AC). Between the AC and an ISP, the AC is acting as a L2TP (Layer 2 Tunneling Protocol) LAC (L2TP Access Concentrator) and tunnels the PPP frames to the ISP.

  • Page 175: Appendix B Pptp

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Appendix B PPTP What is PPTP? PPTP (Point-to-Point Tunneling Protocol) is a Microsoft proprietary protocol (RFC 2637 for PPTP is informational only) to tunnel PPP frames. How can we transport PPP frames from a PC to a broadband modem over Ethernet? A solution is to build PPTP into the ANT (ADSL Network Termination) where PPTP is used only over the short haul between the PC and the modem over Ethernet.
  • Page 176 Prestige 314 Broadband Sharing Gateway with 4-Port Switch PPTP is very similar to L2TP, since L2TP is based on both PPTP and L2F (Cisco’s Layer 2 Forwarding). Conceptually, there are three parties in PPTP, namely the PNS (PPTP Network Server), the PAC (PPTP Access Concentrator) and the PPTP user.
  • Page 177 Prestige 314 Broadband Sharing Gateway with 4-Port Switch PPP Data Connection The PPP frames are tunneled between the PNS and PAC over GRE (General Routing Encapsulation, RFC 1701, 1702). The individual calls within a tunnel are distinguished using the Call ID field in the GRE header.

  • Page 178: Appendix C Power Adapter Specifications

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Appendix C Power Adapter Specifications NORTH AMERICAN PLUG STANDARDS AC Power Adapter Model MW48-1201200 AD48-1201200DUY Input Power AC120Volts/60Hz/22W AC120Volts/60Hz/0.25A Output Power DC12Volts/1.2A DC12Volts/1.2A Power Consumption Safety Standards UL, CUL (UL1314, CSA C22.2 No. 233-M91)

  • Page 179: Appendix D Hardware Specifications

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Appendix D Hardware Specifications SPECIFICATIONS Power Specification I/P AC 120V / 60Hz ; O/P DC 12V 1200 mA MTBF (Mean Time Between Failure) 100000 hrs Operation Temperature 0º C ~ 40 degrees Celsius...

  • Page 180: Glossary

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Glossary 100Base-T Uses two pairs of twisted-pair wire with a maximum distance of 100 meters between the hub and the workstation. 10Base-T The 10-Mbps baseband Ethernet specification that uses two pairs of twisted-pair cabling (Category 3 or 5), one pair for transmitting data and the other for receiving data.
  • Page 181 Prestige 314 Broadband Sharing Gateway with 4-Port Switch information. CHAP Challenge Handshake Authentication Protocol is an alternative protocol that avoids sending passwords over the wire by using a challenge/response technique. Client A software program that is used to contact and obtain data from a server software program on another computer.
  • Page 182 Prestige 314 Broadband Sharing Gateway with 4-Port Switch other systems. Digital The use of a binary code to represent information, such as 0/1, or on/off. Domain Name System links names to IP addresses. When you access Web sites on the Internet you can type the IP address of the site or the DNS name.
  • Page 183 Prestige 314 Broadband Sharing Gateway with 4-Port Switch common questions on a particular subject. The FCC (Federal Communications Commission) is in charge of allocating the electromagnetic spectrum and thus the bandwidth of various communication systems. Flash memory A nonvolatile storage device that can be electrically erased and reprogrammed so that data can be stored, booted and rewritten as necessary.
  • Page 184 Prestige 314 Broadband Sharing Gateway with 4-Port Switch software that you would find on the public Internet, but that is only for internal use. Internet Protocol. (Currently IP version 4 or IPv4). The underlying protocol for routing packets on the Internet and other TCP/IP-based networks.
  • Page 185 Prestige 314 Broadband Sharing Gateway with 4-Port Switch as your Ethernet address). The MAC layer frames data for transmission over the network, then passes the frame to the physical layer interface where it is transmitted as a stream of bits.
  • Page 186 Prestige 314 Broadband Sharing Gateway with 4-Port Switch Plain Text Plain Text is clear text, readable by anyone – it is the opposite of cipher text. Point of The physical point where the phone company ends its responsibility with the wiring of the phone line.
  • Page 187 Prestige 314 Broadband Sharing Gateway with 4-Port Switch HTTP protocol. Protocol Filters Use Protocol Filters to decide whether or not to allow passage of a data packet and/or to make a call. Protocol filters act on IP/IPX packets and can serve as a limited firewall.
  • Page 188 Prestige 314 Broadband Sharing Gateway with 4-Port Switch This is the name of the configuration file on your ZyXEL device. Renaming may be Rom-0 necessary when uploading a new configuration file to your ZyXEL device. A device that connects two networks together. Routers monitor, direct and filter Router information that passes between these networks.
  • Page 189 Prestige 314 Broadband Sharing Gateway with 4-Port Switch Single User Account. Your system’s SUA feature allows multiple user Internet access for the cost of a single ISP account. See also NAT. The subnet mask specifies the network number portion of an IP address. Your device Subnet Mask will compute the subnet mask automatically based on the IP Address that you entered.
  • Page 190 Prestige 314 Broadband Sharing Gateway with 4-Port Switch text files, graphics, video and audio. A URL is the address of an object that is normally typed in the Address field of a Web browser. A URL is basically a pointer to the location of an object.

  • Page 191: Index

    Prestige 314 Broadband Sharing Gateway with 4-Port Switch Index 10/100 MB Auto-negotiation ......1-1 PPP over Ethernet........... A Applying Schedule Sets to Remote Nodes..13-3 Error Log ............9-5 AT command ..........10-1 Ethernet Encapsulation3-8, 4-13, 5-1, 5-2, 5-3, 5- Authentication..........
  • Page 192 Prestige 314 Broadband Sharing Gateway with 4-Port Switch IP Address Assignment......5-7, 5-9 PPPoE Encapsulation3-8, 3-12, 5-1, 5-4, 5-5, 5- IP Alias ............. 1-2, 3-4 10, 5-11 IP Alias Setup ..........3-7 PPTP and the Prestige ........C IP Multicast..........1-2, 3-4 PPTP Encapsulation ....3-10, 5-1, 5-3, 5-8...
  • Page 193 Prestige 314 Broadband Sharing Gateway with 4-Port Switch Trusted Host ..........8-3 TFTP File Transfer ........10-12 SNMP ( Simple Network Management Protocol) TFTP Restrictions .......... 10-4 ..............1-1 time and date setting ........1-3 Standard ..........3-10, 5-2 Time and Date Setting ....11-4, 11-5, 11-6 SUA (Single User Account)....See NAT...

Table of Contents