Application And Subnet-Based Bandwidth Management; Bandwidth Management Priorities; Configuring Bandwidth Management (General); Figure 170 Bandwidth Management: General - ZyXEL Communications P-2602H User Manual

21.5 Application and Subnet-based Bandwidth Management

You could also create bandwidth classes based on a combination of a subnet and an
application. The following example table shows bandwidth allocations for application specific
traffic from separate LAN subnets.

Table 119 Application and Subnet-based Bandwidth Management Example

TRAFFIC TYPE
VoIP (SIP)
Web
FTP
E-mail

21.5.1 Bandwidth Management Priorities

Traffic with a higher priority gets through faster while traffic with a lower priority is dropped
if the network is congested. The following table describes the priorities that you can apply to
traffic that the ZyXEL Device forwards out through an interface.

Table 120 Bandwidth Management Priorities

PRIORITY
High
Mid
Low

21.6 Configuring Bandwidth Management (General)

Click Advanced > Bandwidth MGMT to open the screen as shown next.
Use this screen to enable or disable bandwidth management, and to enable or disable
automatic traffic classification.

Figure 170 Bandwidth Management: General

P-2602H(W)(L)-DxA User's Guide
FROM SUBNET A
64 Kbps
64 Kbps
64 Kbps
64 Kbps
DESCRIPTION
Typically used for voice traffic or video that is especially sensitive to jitter (variations in
delay).
Typically used for "excellent effort" or better than best effort and would include important
business traffic that can tolerate some delay.
This is typically used for non-critical "background" traffic such as bulk transfers that are
allowed but that should not affect other applications and users.
Chapter 21 Bandwidth Management
FROM SUBNET B
64 Kbps
64 Kbps
64 Kbps
64 Kbps
293