Notes On Otist; Figure 70 Otist: Settings; Figure 71 Otist: In Progress On The Zyxel Device; Figure 72 Otist: In Progress On The Wireless Device - ZyXEL Communications P-2602H User Manual

Chapter 9 Wireless LAN

Figure 70 OTIST: Settings

You can use the key in this screen to set up WPA-PSK encryption manually for non-OTIST
devices in the wireless network.
Review the settings, and click OK. The ZyXEL Device begins transferring OTIST settings.
The following screens appear in the ZyXEL Device and in the wireless devices.

Figure 71 OTIST: In Progress on the ZyXEL Device

Figure 72 OTIST: In Progress on the Wireless Device

These screens close when the transfer is complete.

9.6.1 Notes on OTIST

1 If you enable OTIST in a wireless device, you see this screen each time you start the
utility. Click Yes to search for an OTIST-enabled AP (in other words, the ZyXEL
Device).
130
P-2602H(W)(L)-DxA User's Guide