Voip Wizard And Example; Introduction; Voip Wizard Setup; Figure 31 Voip Phone Calls - ZyXEL Communications P-2602H User Manual

C
H A P T E R

VoIP Wizard And Example

This chapter shows you how to configure your SIP account(s) and make a VoIP phone call.

4.1 Introduction

The ZyXEL Device has Voice over IP (VoIP) communication capabilities that allow you to
use a traditional analog telephone to make Internet calls. You can configure the ZyXEL
Device to use up to two SIP based VoIP accounts.
This section describes how you can set up your ZyXEL Device to call someone who is also
using a VoIP device. Make sure your telephone is connected to the Phone 1 port before you
start with our example.
In the following figure, A represents your phone and B represents the phone of the person you
would like to call.

Figure 31 VoIP Phone Calls

In order to make VoIP calls you need to register at least one SIP account on your ZyXEL
Device. You can register your SIP account in the VOICE OVER INTERNET SETUP
wizard.

4.2 VoIP Wizard Setup

1 After you enter the password to access the web configurator, select Go to Wizard setup
and click Apply. Otherwise, click the wizard icon (
web configurator to display the wizard main screen.
P-2602H(W)(L)-DxA User's Guide
4
) in the top right corner of the
71