Qos Screen; Figure 75 Wireless Lan: Qos; Table 41 Wireless Lan: Qos - ZyXEL Communications P-2602H User Manual

9.8 QoS Screen

The QoS screen allows you to automatically give a service (such as e-mail, VoIP or FTP) a
priority level.
Click Network > Wireless LAN > QoS. The following screen displays.

Figure 75 Wireless LAN: QoS

The following table describes the fields in this screen.

Table 41 Wireless LAN: QoS

LABEL
QoS Setup
Enable WMM QoS
WMM QoS Policy
#
Name
Service
Dest Port
P-2602H(W)(L)-DxA User's Guide
DESCRIPTION
Select the check box to enable WMM QoS on the ZyXEL Device.
Select Default to have the ZyXEL Device automatically give a service a
priority level according to the ToS value in the IP header of packets it sends.
WMM QoS (Wifi MultiMedia Quality of Service) gives high priority to voice and
video, which makes them run more smoothly.
Select Application Priority from the drop-down list box to display a table of
application names, services, ports and priorities to which you want to apply
WMM QoS.
The table appears only if you select Application Priority in WMM QoS
Policy.
This is the number of an individual application entry.
This field displays a description given to an application entry.
This field displays either FTP, WWW, E-mail or a User Defined service to
which you want to apply WMM QoS.
This field displays the destination port number to which the application sends
traffic.
Chapter 9 Wireless LAN
133