Figure 24 Connection Test Successful; Figure 25 Wireless Lan Setup Wizard 1; Table 10 Wireless Lan Setup Wizard 1 - ZyXEL Communications P-2602H User Manual

Chapter 3 Internet and Wireless Setup Wizard

Figure 24 Connection Test Successful

2 Use this screen to activate the wireless LAN and OTIST. Click Next to continue.

Figure 25 Wireless LAN Setup Wizard 1

The following table describes the labels in this screen.

Table 10 Wireless LAN Setup Wizard 1

LABEL
Active
Enable OTIST
Setup Key
Back
Next
Exit
66
DESCRIPTION
Select the check box to turn on the wireless LAN.
Select the check box to enable OTIST if you want to transfer your ZyXEL
Device's SSID and WEP or WPA-PSK security settings to wireless clients that
support OTIST and are within transmission range.
You must also activate and start OTIST on the wireless client at the same time.
The process takes three minutes to complete.
Type an OTIST Setup Key of up to eight ASCII characters in length. Be sure to
use the same OTIST Setup Key on the ZyXEL Device and wireless clients.
Click Back to display the previous screen.
Click Next to proceed to the next screen.
Click Exit to close the wizard screen without saving.
P-2602H(W)(L)-DxA User's Guide