Manually Assign A Wpa Key; Manually Assign A Wep Key; Figure 27 Manually Assign A Wpa Key; Figure 28 Manually Assign A Wep Key - ZyXEL Communications P-2602H User Manual

Chapter 3 Internet and Wireless Setup Wizard

3.3.1 Manually Assign a WPA key

Choose Manually assign a WPA key in the Wireless LAN setup screen to set up a Pre-
Shared Key.

Figure 27 Manually Assign a WPA key

The following table describes the labels in this screen.

Table 12 Manually Assign a WPA key

LABEL
Pre-Shared
Key
Back
Next
Exit

3.3.2 Manually Assign a WEP Key

Choose Manually assign a WEP key to setup WEP Encryption parameters.

Figure 28 Manually Assign a WEP key

68
DESCRIPTION
Type from 8 to 63 case-sensitive ASCII characters. You can set up the most secure
wireless connection by configuring WPA in the wireless LAN screens. You need to
configure an authentication server to do this.
Click Back to display the previous screen.
Click Next to proceed to the next screen.
Click Exit to close the wizard screen without saving.
P-2602H(W)(L)-DxA User's Guide