Restart; Using Ftp Or Tftp To Back Up Configuration; Using The Ftp Commands To Back Up Configuration; Figure 213 Reset In Process Message - ZyXEL Communications P-2602H User Manual

Figure 213 Reset In Process Message

You can also press the RESET button on the rear panel to reset the factory defaults of your
ZyXEL Device. Refer to

27.6 Restart

System restart allows you to reboot the ZyXEL Device without turning the power off.
Click Maintenance > Tools > Restart. Click Restart to have the ZyXEL Device reboot. This
does not affect the ZyXEL Device's configuration.

Figure 214 Restart Screen

27.7 Using FTP or TFTP to Back Up Configuration

This section covers how to use FTP or TFTP to save your device's configuration file to your
computer.

27.7.1 Using the FTP Commands to Back Up Configuration

1 Launch the FTP client on your computer.
2 Enter "
3 Press [ENTER] when prompted for a username.
4 Enter your password as requested (the default is "1234").
5 Enter "
6 Use "
get
rom-0 config.rom
P-2602H(W)(L)-DxA User's Guide
Section 1.6 on page 48
", followed by a space and the IP address of your ZyXEL Device.
open
" to set transfer mode to binary.
bin
" to transfer files from the ZyXEL Device to the computer, for example, "
" transfers the configuration file on the ZyXEL Device to your
for more information on the RESET button.
Chapter 27 Tools
get
351