Setting Up Voip Service; Calling Tips - Zoom X5V User Manual

2 2 2 2
Click Save Changes, then Write Settings to Flash and
Reboot, and then Confirm.
3 3 3 3
Resume where you left off (either Step 4 on page 13 or
Step 5 on page 15).

1.5 Setting up VoIP Service

If you purchased a X5v Model 5565, your unit has been set up for
VoIP service, so continue at Section 1.6 Calling Tips below. If you
purchased another Model X5v, please go to Chapter 2 on page 32.

1.6 Calling Tips

You can use phones plugged into the X5v to:
1) Make or receive a VoIP call. Your ADSL phone line will
remain open for calls, so using VoIP gives you many of the
benefits of having a second phone line.
Make a VoIP call to someone who is using the same VoIP
service: Pick up the telephone that you plugged into the X5v.
Dial # and wait for the dial tone, and then dial the VoIP
phone number you want to call. Note that this number is not
the same as a phone number reached through the traditional
public phone network. Your service provider's web site should
include a directory of VoIP phone numbers.
Make VoIP calls to someone who is using a different
VoIP service: You must begin your call by dialing a code for
that person's VoIP service. You will have to ask the person for
the code, or check their service provider's web site for
directions.
Receive incoming VoIP calls: When VoIP users call into
your VoIP number, you will hear a distinctive ring to alert you
that you are receiving a VoIP call.
Call people who don't have VoIP: You may use VoIP to call
any phone that can be called through the traditional phone
network. Your service provider may offer this as an additional
feature. Check with your service provider.
2) Make or receive "conventional" calls: Pick up the telephone
and dial as you normally would. As long as you don't dial # to
16
X5v
ADSL User's Guide