Setting Up Security Using Wep - Zoom 5363 User Manual

Setting Up Security Using WEP

If any of your network devices DOES NOT support WPA or WPA2, you can use WEP to
configure network security. WEP can be configured two ways: 64-bit and 128-bit. 128-bit
WEP provides more security than 64-bit.
1 Open the Zoom Configuration Manager by typing the following in your Web browser's
address bar: http://192.168.0.1
2 In the Login dialog box, type the following User Name and Password in lower case,
then click Login.
User Name: admin
Password: admin
3 Click Wireless on the top menu.
4 The Wireless Radio page appears. Under Select 2.4 or 5 GHz option. Select 2.4 GHz
and click Apply.
5 Then click Primary Network on the left-side menu.
6 To change the wireless security, start by setting the following drop-down menus to
Disable: WPA, WPA-PSK, WPA2, and WPA2-PSK
7 From the WEP Encryption drop-down menu, select WEP-64 bit (or WEP-128 bit for
more security).
8 For Network Key 1, you can either enter your own WEP Key or you can have WEP
Keys generated.
If you are entering a network key of your choice, enter 13 ASCII characters or 26
hexadecimal digits for 128-bit encryption keys. Enter 5 ASCII characters or 10
hexadecimal digits for 64-bit encryption keys.
Otherwise, type something into the text box and click on Generate WEP Keys and
WEP Keys will automatically be generated for you.
Caution! Do not click Apply until you have entered WEP Keys.
9 Click Apply.
10 Now you need to set up each of your wireless devices with the SSID and
passphrase. See
for help on connecting your wireless computers and devices.
Your security setup configuration is now complete!
Chapter 3, Connecting other Devices to the Cable Modem/Router
32