Zoom X5V User Manual page 65

IP/Mask
There are three ways to use this database. Choices
are Single IP , IP Range , or Subnet Mask . Your
selection depends on whether you want to specify
one IP address for an entire group, a range of IP
addresses for a group, or a range of subnet masks
for a group.
IP Entry Name
Name of your choosing. Purpose is to identify the IP
group you want to set up. Maximum field length=19
characters.
IP addr.1
IP address that you want to assign to a group.
If you selected Single IP , enter that IP address here.
If you selected the IP Range option because you
want to designate a range of addresses, enter the
beginning of the range here and enter the ending
range in the IP addr.2 field.
If you selected the Subnet Mask option, enter the
desired IP address here and enter the subnet mask
in the IP addr.2 field. All addresses falling within that
subnet will be included in the group you set up.
Chapter 4: Using the X5v's Advanced Firewall 65