Zoom X5V User Manual page 53

6 6 6 6 All Users: Go back to the X5v's Advanced Setup page
and click the DMZ button.
If you already closed the Zoom DSL VoIP Gateway Web-
Console, click on the Zoom X5v icon on your desktop (or type
10.0.0.2 in your Web browser) and click the Advanced Setup icon.
7 7 7 7 Configure the DMZ.
Select Enable from the DMZ list, and enter 10.0.0.16 in the DMZ
Host IP box. Click Save Changes and then click Write Settings
to Flash and Reboot. You're done!
IMPORTANT:
Outside users will need to know the X5v's WAN IP address. To
find this address, click the System Status icon at the top of the
X5v's web page and scroll down to the WAN Status section.
Chapter 3: Advanced Setup Options 53