Service Filtering - Zoom X5V User Manual

Once you've made your selections, click Save Changes and Write
Settings to Flash and Reboot.

Service Filtering

The Service Filtering feature lets you give certain users permission
to access the X5v from outside the network—that is, over the
Internet. If you enable one of the services listed on this page, the
X5v's firewall will open up the appropriate port to allow the service
to work.
PING from External Network
FTP from External Network*
DNS from External Network
IKE from External Network
RIP from External Network
DHCP from External Network
*Important: To complete the step of allowing remote users to
FTP into the X5v, you must go to the X5v's Advanced Setup
Chapter 4: Using the X5v's Advanced Firewall
Disabled by default. Enable it
to allow an external user to
ping your X5v. This can be
useful if you need to
troubleshoot your unit.
Disabled by default. Enable it
to allow an external user to ftp
into your X5v. Typically, you
would do this if you wanted
someone to check the X5v's
configuration.
Disabled by default. Enable it
to allow your X5v to accept
DNS requests from an external
source.
Disabled by default. Enable it
to allow a VPN (virtual private
network) connection to your
network.
Disabled by default. Enable it
to allow your X5v to receive
RIP (Routing Information
Protocol) requests from an
external source. The Technical
Reference Manual contains
details about RIP; go to
www.zoom.com
Disabled by default. Enable it
to allow your X5v to receive
DHCP requests from an
external source.
59