What You Will Need; Installing The Software - Zoom X5V User Manual

If anything is missing or damaged, contact Zoom Customer
Support or your retailer or distributor.
In addition, you may have:
Phone-jack adapter to adapt the RJ-11 phone cord to a
different phone jack (certain units only)
DSL line filter(s) (certain units only).

What You Will Need

A Macintosh, Linux, or Windows computer with an
Ethernet port, a Windows computer with a USB port, or a
network device like a wireless access point or hub.
An ADSL-enabled telephone wall jack to plug the X5v unit
into.
A telephone to plug into the X5v if you plan to use VoIP.
Installing the X5v involves several steps: Installing the Software,
Installing the Hardware, Configuring Internet Explorer,
Configuring ADSL, and Setting Up VoIP Service.

1.1 Installing the Software

Installing the software is only required for people connecting a
Windows computer directly to the X5v. All others should skip to
Step 1.2 below.
Windows 98/98SE, Me, 2000, and XP Users:
If your computer has an available Ethernet jack, we
recommend that you use that instead of the USB jack to
simplify installation.
If you need to use the X5v's USB jack, you must remove any
previously installed USB modem drivers on your computer
before installing this software. To do this from your Windows
desktop, click the Start button, point to Settings, and select
Control Panel. In Control Panel, double-click Add/Remove
Programs, on the Install/Uninstall tab, select your old USB
modem from the list, and click Remove. Now continue below.
6
X5v
ADSL User's Guide