Zoom X5V User Manual page 13

2 2 2 2
Click Save Changes.
3 3 3 3
If the Encapsulation setting that you entered starts with
either PPPoE or PPPoA: Click Write Settings to Flash and
Reboot, and Confirm. Once the process is complete, the
X5v's LINK light remain on steady (this should take about 15
seconds). If it doesn't, go to the Connection Troubleshooting
Tips on page 77.
If the Encapsulation setting that you entered starts with
either 1483 Bridged or 1483 Routed: You must check now to
make sure that your IP Addressing is correctly set. Go to page
15.
4 4 4 4
Go to your Web Browser (i.e., Internet Explorer or Netscape
Navigator) and try to connect to a familiar Web address.
5 5 5 5
If you connect successfully, your installation is complete
and you're ready to browse the web! Continue with Setting
Up VoIP Service on page 16.
If you do not connect successfully, refer to the
Troubleshooting Appendix on page 77.
Chapter 1: Installation Instructions 13