Basic Setup; Setting Up A Wireless Guest Network - Zoom X7N User Manual

Basic Setup

The table below explains the Wireless Basic settings:
This setting... Lets you specify...
Enable Wireless A check mark in the Enable Wireless check
box shows that your wireless network is up. If
there is no check mark next to the Enable
Wireless check box, the X7N's Wireless
capability is not enabled.
Channel Indicates the channel your wireless connection
uses by default for your wireless connection.
The X7N comes set for channel 10.
SSID (Wireless The Service Set Identifier for your wireless
Network network. By default, the SSID for the X7N is
Name) Zoom. You can change the SSID to any name
that you want.
BSSID Shows the Wireless MAC address of your
(Broadcast X7N.
SSID)
Country Select your country from the drop-down
menu.
Max Clients Up to 16 wireless clients are allowed on each
network.
Hide SSID Click in the check box if you do not want to
broadcast the SSID of your network.
Client Isolation Enabling client isolation will prevent wireless
clients on the same network from
communicating with each other. Typically, this
feature is used in public hotspots or corporate
environments.

Setting up a Wireless Guest Network

A wireless guest network can be set up so you can give visitors
access to the Internet without giving them access to other
computers on your network.
Chapter 5: Wireless Options X7N User Manual