Wds - Zoom X7N User Manual

WDS

WDS is used to extend the range of your wireless network. Other
wireless access points that support WDS can connect wirelessly to
the X7N to expand the range of your wireless network.
The table explains the following settings for WDS:
This setting... Lets you specify...
AP Mode Most users should select Access Point to
communicate with both Wireless Clients and
Wireless Access points. Selecting WDS means
that the X7N can only communicate with
other Access Points.
Bridge Restrict Select Disable if you want Access point to be
able to bridge to the X7N.
Select Enabled or Enabled(Scan) to control
which access points have access to the X7N.
If you know the MAC address of the Access
points you wish to allow access to, select
Enabled, and enter the MAC address in the
Remote Bridges MAC address field. If you
don't know the MAC address, select Enabled
(Scan) to show a list of access points that you
can allow access. Click the check box next to
each access point that you want to grant
access.
Remote Bridges In Enabled mode, you can enter the MAC
MAC address addresses of the access points you wish to
associate with. In Enabled (Scan) mode, it
displays a list of access points so you can select
which ones to grant access.
Click Refresh to update the remote bridges. Wait for a few
seconds to update.
Click Save/Apply to configure the wireless bridge options.
41