Using Your X5 With Play Station ® 2 - Zoom X5 User Manual

Using Your X5 with PlayStation
You should have already completed the Quick Start Instructions on
page 6.
Note: You must plug the PlayStation unit into a computer to
configure it and you must use the X5's Ethernet option.
Be sure to enter the login User Name and Password
supplied by your ISP on the X5's Basic Setup page.
1 1 1 1
Navigate to the Advanced Setup page and click the Virtual
Server button. On the Virtual Server page, you need to
specify 10 entries, one at a time. Tip: If you are unfamiliar with
setting up a virtual server, please refer to page 22 of this
manual.
a a a a
Fill out the following fields:
Public Port=10070
Private Port=10070
Port Type=TCP
Host IP Address=10.0.0.50
and then click Add This Setting.
b b b b
You have to perform this task for ports 70 to 80. That is, the
next entry would be
Public Port=10071
Private Port=10071
Port Type=TCP
Host IP Address=10.0.0.50
and so on until you have entered 10080.
Don't forget to click Add This Setting each time.
c c c c
When you have entered all 10 entries, click Write Settings to
Flash and Reboot and then Confirm.
Important: Once you are done, you must run the PlayStation
installation using the PS2 CD. Follow the prompts.
44
® 2
X5
ADSL Modem User's Manual