Zoom X5 User Manual page 19

User Name
Password
Service Name
Disconnect Time
MRU*
MTU*
MSS*
Authentication
Automatic Reconnect
*You must enter your PPP User Name and Password before making changes to
these fields; otherwise they will not take effect.
DHCP (Dynamic Host Configuration Protocol)
DHCP is disabled by default. Typically, you should not need to
change your DHCP setting. Do so only if your service provider
requests it.
DHCP client enable
Host Name
Chapter 2: Advanced Setup Options
Supplied by your service provider.
Supplied by your service provider.
Optional; supplied by your service provider.
ADSL connection will be dropped after the
ADSL line is idle for a certain amount of time
(measured in seconds). Select 0 to ensure
that you won't be disconnected.
Maximum Receive Unit. Largest physical
packet size, in bytes, that a network can
accept. Any messages larger must be
fragmented. Default is 1492.
Maximum Transmission Unit. Largest
physical packet size, in bytes, that a network
can send. Any messages larger must be
fragmented. Default is 1492.
Maximum Segment Size. Largest data
segment, in bytes, allowed within each IP
packet. Default is 1432.
PPP user authentication method. Default is
Auto; you can specify CHAP or PAP only.
Enabled by default. Check this box if you do
not want to be reconnected automatically if
the ADSL connection is terminated
unexpectedly.
Check this box only if instructed to by your
service provider.
If necessary, supplied by your service
provider.
19