Performing System Administration Tasks - Zoom X5 User Manual

3.3 Performing System Administration
Tasks
To change system administration-type settings, click the Advanced
Setup icon at the top of the main user interface page. Under the
Administration heading, you will see items such as Admin
Password and System Log.
For example, you can
Change the Admin Password:
Type the new password, then retype it for verification
purposes. Note: The password must be at least 8 characters. If
you change your password and then forget it, your only
recourse is to reset it to the default by performing a hardware
system reset (see page 38).
View System Log.
Click this button to view a log of system activity.
Perform a Diagnostic Test.
The X5's user interface uses a few basic buttons, which are listed in
the table below.
Button
Save Changes
Write Settings to
Flash and Reboot
Help
Note: We strongly recommend that you change the administrator
password to safeguard the security of your network.
Chapter 3: System Administration
Function
Clicking this button initiates new settings and
changes.
Clicking this button puts new settings and
changes into effect—and restarts the unit.
(Changes do not become effective until unit is
restarted.)
Clicking the Help icon at the top of any page
displays context-sensitive help.
37