Problems With Plug And Play Setup - Zoom ComStar XT SVD Owner's Manual

4 Windows 95 continues its startup procedure. Once the
system is completely booted up, you should determine what
COM port your faxmodem is set to. To do this, double-click
the My Computer icon. When the My Computer window
opens, double-click the Control Panel icon. Inside the
Control Panel window, double-click the Modems icon. In the
Modems Properties dialog box, select this product, which
should be listed as a modem found by the system. Then click
Properties. Your faxmodem's properties are listed in a
Properties dialog box. In the Port box, it lists your
Communications Port and then, in parentheses, the COM
number. Make a note of this port setting and write it in the
Important Information table in the Quick Start (or in some
other easy-to-find place). The COM port information is
important because you will be asked to set the COM port
when you configure your software applications.

Problems with Plug and Play Setup

If this setup doesn't proceed properly, read and perform the
following steps before calling Tech Support.
Using the Hardware Conflict Wizard
Windows 95, with its Plug and Play feature, is a major
improvement over previous versions of Windows. But under some
circumstances, Plug and Play may not resolve all installation
problems.
For example, if you have a lot of optional hardware installed in
your computer, you can still encounter a problem installing your
modem. Conflicts may arise when you have a sound card
installed, or a graphics tablet, a second printer, or a combination
of these. The problem is insufficient COM port and interrupt (IRQ)
resources.
The Windows 95 Help system has an excellent tool (called a
"wizard") for thoroughly diagnosing and solving many of your
problems. To use this procedure, do the following:
Double-click the My Computer icon on your desktop.
The system displays the My Computer window.
Setting Up Your Faxmodem for Windows 95 13