Connecting A Windows 7 Computer With Built-In Wireless Capabilities - Zoom X6 User Manual

need help installing your wireless adapter or setting its mode, refer
to the documentation that came with it. After you install the
adapter, see the instructions on page 22 for Connecting a
Computer with a wireless adapter to the X6.
Connecting a Windows 7
Computer with Built-in Wireless
Capabilities
1
From the taskbar, click on the wireless symbol.
2
In the wireless network options box, highlight Zoom and click
Connect.
• If your desired network is secured, in the next dialog box
enter the security key or password and click Connect.
• If your desired network is unsecured, in the message box
select Connect Anyway.
Note: We strongly recommend that you set up a secured
network. For information on wireless security, see Setting
Wireless Security on page 27.
If you have difficulty connecting, make sure you have entered
the correct password. Then perform a power cycle on your
computer and the X6 as described in
Troubleshooting Tips
3
In the Successfully connected to [desired network] dialog
box, you have three options. You can:
•
Select Save the network and Start this connection
automatically if you always want to connect to the same
network. Then click Close. The next time you start your
computer you will automatically connect to the selected
network.
• Select Save the network and clear the Start this
connection automatically check box if you don't want to
automatically connect to this network every time you start
your computer but you will want to connect in the future.
Click Close to display the Select a location . . . dialog box
Chapter 3: Setting Up Your Wireless Network
Appendix D:
on page 72.
19