S Firmware - Zoom X5 User Manual

Zoom user's manual adsl modem x5
Hide thumbs Also See for X5:
Table of Contents

Advertisement

3.5 Updating the Unit's Firmware
To upgrade the X5's firmware, click the Advanced Setup icon at
the top of the main interface page and then follow these steps.
1 1 1 1
You must first download the upgrade file (for example, from
our web site or a floppy disk). Save it under a filename with a
.dlf extension.
2 2 2 2
Click the Firmware Update button and then click Image
Download. The unit will restart itself and switch into
download mode.
3 3 3 3
Click Browse and select the upgrade file.
4 4 4 4
Click Upload. The modem will restart itself when the upload is
done. The front panel LINK light will go off during the
rebooting process. Then it will blink and finally remain on
steady; the process is now complete. Note: This process may
take up to a minute.
VERY IMPORTANT!
Do not turn off the X5 or unplug it while you are
upgrading the firmware or while the unit is in download
mode.
5 5 5 5
Close and re-open your Web browser and resume your
Internet session.
Chapter 3: System Administration
39

Advertisement

Table of Contents
loading

This manual is also suitable for:

X4

Table of Contents