Default Gateway - Zoom X5 User Manual

Encapsulation
The Encapsulation mode, like the VPI and VCI numbers, is
specified by your service provider (see Permanent VC Settings,
page 17).
Encapsulation
This mode is supplied by your service provider
(reference table appears on page 5).
Bridge
The Bridge option is disabled by default. You should enable it
only if your service provider instructs you to.
IGMP (Internet Group Management Protocol)
IGMP is the Internet standard for IP multicasting, or broadcasting
a message to many recipients simultaneously. Your choices are
enabled or disabled; the default is disabled.
IMPORTANT:
Before enabling IGMP, navigate to the Advanced Setup
page, click Misc Configuration, select Enabled in the
IGMP Proxy dropdown list, and click Save Changes and
Write Settings to Flash and Reboot. If you don't
perform this step first, enabling IGMP on this page will
not have any effect.

Default Gateway

Normally, you would not enter anything into the Default Gateway
field. You would do so only if you want to connect your modem to
the Internet via a different Gateway Router, or if your service
provider has instructed you to change it.
PPP (Point-to-Point Protocol)
PPP is the most widely used protocol for authenticating your
connection to the Internet. Should you change service providers,
you may need to change the data in these fields. Note: These
settings also appear on your Basic Settings page.
18
X5
ADSL Modem User's Manual