Zoom X5 User Manual page 53

Zoom user's manual adsl modem x5

Hide thumbs Also See for X5:

Table of Contents

Click Save and close the Network pane.

5 5 5 5

Linux TCP/IP Settings

The instructions for setting up boot-time DHCP vary dramatically

by distribution, so you may want to refer to your particular

version's documentation.

Note: If you have other network cards installed, you will need to

pick distinct Ethernet identifiers for each (eth0, eth1, eth2,

etc.). If you select an identifier other than eth0 for your

ADSL modem, use that identifier throughout.

For RedHat

Edit or create /etc/sysconfig/network-scripts/ifcfg-eth0 so

that it contains the following three lines:

DEVICE=eth0

ONBOOT=yes

BOOTPROTO=dhcp

If you want to use a static IP address—for example, if you were

setting up a virtual server (page 22) or a DMZ (page 25)—you

would edit or create /etc/sysconfig/network-scripts/ifcfg-eth0

so that it contains the following lines:

DEVICE=eth0

ONBOOT=yes

BOOTPROTO=static

Appendix D: Macintosh and Linux Users: Configuring TCP/IP Settings

Table of Contents